Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Carbon Steel AISI 1018 Round Bars supplier, exporter, trader, wholesaler, stockiest.

AISI 1018 mild/low carbon steel has excellent weldability and produces a uniform and harder case and it is considered as the best steel for carburized parts. AISI 1018 mild/low carbon steel offers a good balance of toughness, strength and ductility. Provided with higher mechanical properties, AISI 1018 hot rolled steel also includes improved machining characteristics and Brinell hardness.

Specific manufacturing controls are used for surface preparation, chemical composition, rolling and heating processes. All these processes develop a supreme quality product that are suited to fabrication processes such as welding, forging, drilling, machining, cold drawing and heat treating.

Size Specifications for Carbon Steel AISI 1018 Round Bars: 6mm upto 400mm

Size Specifications for Carbon Steel AISI 1018 Square, Flat, Rectangular Bars: 8mm upto 55mm in thickness, 500mm to 6000mm length(can be Customized)

Size Specifications for Carbon Steel AISI 1018 Hollow Bars: 50mm upto 400mm in diameter as welded hollow bars & 2inch to 16inch diameter as seamless hollow bars

Size Specifications for Carbon Steel AISI 1018 Hollow Rings: 50mm upto 1000mm in diameter as welded hollow rings & 2inch to 30inch diameter as seamless hollow rings

Chemical Composition (Chemistry) of Carbon Steel AISI 1018 Round Bars:

Element	Content
Carbon, C	0.14 - 0.20 %
Iron, Fe	98.81 - 99.26 % (as remainder)
Manganese, Mn	0.60 - 0.90 %
Phosphorous, P	≤ 0.040 %
Sulfur, S	≤ 0.050 %

Different Designations of Carbon Steel AISI 1018 Round Bars:

AMS 5069, AMS 5069A, ASTM A108, ASTM A29, ASTM A510, ASTM A513, ASTM A519, ASTM A544, ASTM A545, ASTM A548, ASTM A549, ASTM A576, ASTM A659, MIL SPEC MIL-S-11310 (CS1018), SAE J403, SAE J412, SAE J414, UNS G10180

Client can procure smaller quantities of AISI 1018 Round Bars online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Machining properties of AISI 1018:

The machinability of AISI 1018 mild/low carbon steel is graded at 78% of B1112.

Weldability properties of AISI 1018:

AISI 1018 mild/low carbon steel can be instantly welded by all the conventional welding processes. Welding is not recommended for AISI 1018 mild/low carbon steel when it is carbonitrided and carburized.

Low carbon welding electrodes are to be used in the welding procedure, and post-heating and pre-heating are not necessary. Pre-heating can be performed for sections over 50 mm. Post-weld stress relieving also has its own beneficial aspects like the pre-heating process.

Heat Treatment properties of AISI 1018:

The heat treatment for AISI 1018 mild/low carbon steel consists of the following processes:

Normalizing properties of AISI 1018:

• AISI 1018 mild/low carbon steel should be heated at 890°C – 940°C and then cooled in still air.

Forging properties of AISI 1018:

• This process requires heating between 1150°C – 1280°C and AISI 1018 mild/low carbon steel is held until the temperature becomes constant.
• 900°C is the minimum temperature required for the forging process.
• The steel is then cooled in air after this process.

Tempering properties of AISI 1018:

• AISI 1018 mild/low carbon steel is tempered at between 150°C – 200°C for improvement of case toughness. This process has little or no effect on hardness.
• The occurrence of grinding cracks is reduced when AISI 1018 mild/low carbon steel is tempered at the above mentioned temperature.

Annealing properties of AISI 1018:

• The AISI 1018 mild/low carbon steel is heated at 870°C – 910°C and allowed to cool in a furnace

Stress Relieving properties of AISI 1018:

• 500°C – 700°C is required to relieve stress in AISI 1018 mild/low carbon steel that is later cooled down in still air.

Case Hardening properties of AISI 1018:

• This process requires heating to be carried out between 780°C – 820°C. AISI 1018 mild/low carbon steel is then quenched in water.

Core Refining properties of AISI 1018:

• This is an optional process that requires heating at 880°C – 920°C.
• AISI 1018 mild/low carbon steel after being heated is moistened in oil or water.

Carburizing properties of AISI 1018:

• Carburizing takes place at 880°C – 920°C.

Applications of AISI 1018 Mild/Low Carbon Steel:

• It is used in bending, crimping and swaging processes.
• Carburized parts that include worms, gears, pins, dowels, non-critical components of tool and die sets, tool holders, pinions, machine parts, ratchets, dowels and chain pins use AISI 1018 mild/low carbon steel.
• It is widely used for fixtures, mounting plates and spacers.
• It is suitably used in applications that do not need high strength of alloy steels and high carbon.
• It provides high surface hardness and a soft core to parts that include worms, dogs, pins, liners, machinery parts, special bolts, ratchets, chain pins, oil tool slips, tie rods, anchor pins, studs etc.
• It is used to improve drilling, machining, threading and punching processes.
• It is used to prevent cracking in severe bends.
• Forged motor shafts, hydraulic shafts and pump shafts, as well as machinery parts.

 

Other Possible products in Carbon Steel AISI 1018 are mentioned below:

AISI 1018 Cabon Steel Plates

AISI 1018 Cabon Steel Circles

AISI 1018 Cabon Steel Strips

AISI 1018 Cabon Steel Sheets

AISI 1018 Cabon Steel Coil

AISI 1018 Cabon Steel Foil

AISI 1018 Cabon Steel Patti

AISI 1018 Cabon Steel Patta

AISI 1018 Cabon Steel Plate Shapes

AISI 1018 Cabon Steel Custom Profiles

AISI 1018 Cabon Steel Tube

AISI 1018 Cabon Steel Tubing

AISI 1018 Cabon Steel Pipe

AISI 1018 Cabon Steel Billets

AISI 1018 Cabon Steel Bar

AISI 1018 Cabon Steel Round Bars

AISI 1018 Cabon Steel Flat Bars

AISI 1018 Cabon Steel Square Bars

AISI 1018 Cabon Steel Hexagonal Bars

AISI 1018 Cabon Steel Rectangular Bars

AISI 1018 Cabon Steel Forged Bars

AISI 1018 Cabon Steel Rolled Bars

AISI 1018 Cabon Steel Black Bars

AISI 1018 Cabon Steel Bright Bars

AISI 1018 Cabon Steel Peeled Bars

AISI 1018 Cabon Steel Machined Bars

AISI 1018 Cabon Steel Hollow Bars

AISI 1018 Cabon Steel Blocks

AISI 1018 Cabon Steel Slabs

AISI 1018 Cabon Steel Rings

AISI 1018 Cabon Steel Forged Seamless Rings

AISI 1018 Cabon Steel Rolled Seamless Rings

AISI 1018 Cabon Steel Fasteners

AISI 1018 Cabon Steel Bolts

AISI 1018 Cabon Steel Nuts

AISI 1018 Cabon Steel Screws

AISI 1018 Cabon Steel Washers

AISI 1018 Cabon Steel Studs

AISI 1018 Cabon Steel Flanges

AISI 1018 Cabon Steel Forgings

AISI 1018 Cabon Steel Machined Parts

Cabon Steel C15D / CK15 / C15 Plates

Cabon Steel C15D / CK15 / C15 Circles

Cabon Steel C15D / CK15 / C15 Strips

Cabon Steel C15D / CK15 / C15 Sheets

Cabon Steel C15D / CK15 / C15 Coil

Cabon Steel C15D / CK15 / C15 Foil

Cabon Steel C15D / CK15 / C15 Patti

Cabon Steel C15D / CK15 / C15 Patta

Cabon Steel C15D / CK15 / C15 Plate Shapes

Cabon Steel C15D / CK15 / C15 Custom Profiles

Cabon Steel C15D / CK15 / C15 Tube

Cabon Steel C15D / CK15 / C15 Tubing

Cabon Steel C15D / CK15 / C15 Pipe

Cabon Steel C15D / CK15 / C15 Billets

Cabon Steel C15D / CK15 / C15 Bar

Cabon Steel C15D / CK15 / C15 Round Bars

Cabon Steel C15D / CK15 / C15 Flat Bars

Cabon Steel C15D / CK15 / C15 Square Bars

Cabon Steel C15D / CK15 / C15 Hexagonal Bars

Cabon Steel C15D / CK15 / C15 Rectangular Bars

Cabon Steel C15D / CK15 / C15 Forged Bars

Cabon Steel C15D / CK15 / C15 Rolled Bars

Cabon Steel C15D / CK15 / C15 Black Bars

Cabon Steel C15D / CK15 / C15 Bright Bars

Cabon Steel C15D / CK15 / C15 Peeled Bars

Cabon Steel C15D / CK15 / C15 Machined Bars

Cabon Steel C15D / CK15 / C15 Hollow Bars

Cabon Steel C15D / CK15 / C15 Blocks

Cabon Steel C15D / CK15 / C15 Slabs

Cabon Steel C15D / CK15 / C15 Rings

Cabon Steel C15D / CK15 / C15 Forged Seamless Rings

Cabon Steel C15D / CK15 / C15 Rolled Seamless Rings

Cabon Steel C15D / CK15 / C15 Fasteners

Cabon Steel C15D / CK15 / C15 Bolts

Cabon Steel C15D / CK15 / C15 Nuts

Cabon Steel C15D / CK15 / C15 Screws

Cabon Steel C15D / CK15 / C15 Washers

Cabon Steel C15D / CK15 / C15 Studs

Cabon Steel C15D / CK15 / C15 Flanges

Cabon Steel C15D / CK15 / C15 Forgings

Cabon Steel C15D / CK15 / C15 Machined Parts

DIN 1.1141 / 1.0401 / 1.0453 Plates

DIN 1.1141 / 1.0401 / 1.0453 Circles

DIN 1.1141 / 1.0401 / 1.0453 Strips

DIN 1.1141 / 1.0401 / 1.0453 Sheets

DIN 1.1141 / 1.0401 / 1.0453 Coil

DIN 1.1141 / 1.0401 / 1.0453 Foil

DIN 1.1141 / 1.0401 / 1.0453 Patti

DIN 1.1141 / 1.0401 / 1.0453 Patta

DIN 1.1141 / 1.0401 / 1.0453 Plate Shapes

DIN 1.1141 / 1.0401 / 1.0453 Custom Profiles

DIN 1.1141 / 1.0401 / 1.0453 Tube

DIN 1.1141 / 1.0401 / 1.0453 Tubing

DIN 1.1141 / 1.0401 / 1.0453 Pipe

DIN 1.1141 / 1.0401 / 1.0453 Billets

DIN 1.1141 / 1.0401 / 1.0453 Bar

DIN 1.1141 / 1.0401 / 1.0453 Round Bars

DIN 1.1141 / 1.0401 / 1.0453 Flat Bars

DIN 1.1141 / 1.0401 / 1.0453 Square Bars

DIN 1.1141 / 1.0401 / 1.0453 Hexagonal Bars

DIN 1.1141 / 1.0401 / 1.0453 Rectangular Bars

DIN 1.1141 / 1.0401 / 1.0453 Forged Bars

DIN 1.1141 / 1.0401 / 1.0453 Rolled Bars

DIN 1.1141 / 1.0401 / 1.0453 Black Bars

DIN 1.1141 / 1.0401 / 1.0453 Bright Bars

DIN 1.1141 / 1.0401 / 1.0453 Peeled Bars

DIN 1.1141 / 1.0401 / 1.0453 Machined Bars

DIN 1.1141 / 1.0401 / 1.0453 Hollow Bars

DIN 1.1141 / 1.0401 / 1.0453 Blocks

DIN 1.1141 / 1.0401 / 1.0453 Slabs

DIN 1.1141 / 1.0401 / 1.0453 Rings

DIN 1.1141 / 1.0401 / 1.0453 Forged Seamless Rings

DIN 1.1141 / 1.0401 / 1.0453 Rolled Seamless Rings

DIN 1.1141 / 1.0401 / 1.0453 Fasteners

DIN 1.1141 / 1.0401 / 1.0453 Bolts

DIN 1.1141 / 1.0401 / 1.0453 Nuts

DIN 1.1141 / 1.0401 / 1.0453 Screws

DIN 1.1141 / 1.0401 / 1.0453 Washers

DIN 1.1141 / 1.0401 / 1.0453 Studs

DIN 1.1141 / 1.0401 / 1.0453 Flanges

DIN 1.1141 / 1.0401 / 1.0453 Forgings

DIN 1.1141 / 1.0401 / 1.0453 Machined Parts

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of AISI 1018 Round Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading AISI 1045 / 1.0503 / C45 Round Bars supplier, exporter, trader, wholesaler, stockiest.

AISI 1045 / 1.0503 / C45 is a medium carbon tensile steel. It find its applications in various forging shafts, gears, axles, pins, bolts, studs, nuts, fasteners, pins, rolls, rams, sockets, worms, light gears, guide rods, hydraulic clamps, torsion bars, crankshafts, ratchets, spindles, connecting rods, etc. in various industries. It has about 0.43-0.50% Carbon. Hence is named as 1045 & last two digits 45 indicate carbon content. AISI 1045 / 1.0503 / C45 Bars can be avail as Concast (CC), Rolled, Forged  in normalized, annealed, hardened (quenched) & tempered condition with black, bright, peeled, proof machined finish. Client can avail AISI 1045 / 1.0503 / C45 Round Bars, Round Corner Bars (RCS), Square Corner Bars (SCS), Flat Bars, Rectangular Bars, Hollow Bars.

Size Specifications for Alloy Steel AISI 1045 / 1.0503 / C45 Billets: 125 x 125, 160 x 160, 200 x 200mm

Size Specifications for Alloy Steel AISI 1045 / 1.0503 / C45 Round Bars: 6mm upto 1200mm

Size Specifications for Alloy Steel AISI 1045 / 1.0503 / C45 Square, Flat, Rectangular Bars: 6mm upto 800mm in thickness, 3000mm to 6000mm length(can be Customized)

Size Specifications for Alloy Steel AISI 1045 / 1.0503 / C45 Hollow Bars: 50mm upto 2200mm in diameter as welded hollow bars & 2inch to 80inch diameter as seamless hollow bars

Size Specifications for Alloy Steel AISI 1045 / 1.0503 / C45 Hollow Rings: 50mm upto 2000mm in diameter as welded hollow rings & 2inch to 80inch diameter as seamless hollow rings

Chemical Composition (Chemistry) of AISI 1045 / 1.0503 / C45 Round Bars:

C	Si	Mn	Ni	P	S	Cr	Mo
0.43 - 0.5	max   0.4	0.5 - 0.8	max   0.4	max   0.045	max   0.045	max   0.4	max   0.1

Different Designations of AISI 1045 / 1.0503 / C45:

EU EN: C45

USA AISI: 1042, 1045, Gr.1043

Germany DIN,WNr: 1.0503, C45

Japan JIS: S45C

France AFNOR: AF65C45, C45

England BS: 070M4650HS

Italy UNI: 1C45, C45

Spain UNE: C45k

China GB: 45

Sweden SS: 1650

Poland PN: 45

Czechia CSN: 12050

Austria ONORM: C45SW

Russia Gost: 45

Inter ISO: C45

Client can procure smaller quantities of AISI 1045 / 1.0503 / C45 Round Bars online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Other Possible products in Carbon Steel AISI 1045 / 1.0503 / C45 are mentioned below:

SAE / AISI 1045 Plate

SAE / AISI 1045 Circles

SAE / AISI 1045 Sheets

SAE / AISI 1045 Patti

SAE / AISI 1045 Patta

SAE / AISI 1045 Plate Shapes

SAE / AISI 1045 Custom Profiles

SAE / AISI 1045 Billets

SAE / AISI 1045 Blooms

SAE / AISI 1045 Concast CC Billets

SAE / AISI 1045 Bar

SAE / AISI 1045 Round Bars

SAE / AISI 1045 Flat Bars

SAE / AISI 1045 Square Bars

SAE / AISI 1045 Hexagonal Bars

SAE / AISI 1045 Rectangular Bars

SAE / AISI 1045 Forged Bars

SAE / AISI 1045 Rolled Bars

SAE / AISI 1045 Black Bars

SAE / AISI 1045 Bright Bars

SAE / AISI 1045 Peeled Bars

SAE / AISI 1045 Machined Bars

SAE / AISI 1045 Hollow Bars

SAE / AISI 1045 Blocks

SAE / AISI 1045 Slabs

SAE / AISI 1045 Shafts

SAE / AISI 1045 Rings

SAE / AISI 1045 Forged Seamless Rings

SAE / AISI 1045 Rolled Seamless Rings

SAE / AISI 1045 Hollow Rings

SAE / AISI 1045 Forgings

SAE / AISI 1045 Machined Parts

SAE / AISI 1045 Welded Components

EU EN / DIN 1.0503 Plate

EU EN / DIN 1.0503 Circles

EU EN / DIN 1.0503 Sheets

EU EN / DIN 1.0503 Patti

EU EN / DIN 1.0503 Patta

EU EN / DIN 1.0503 Plate Shapes

EU EN / DIN 1.0503 Custom Profiles

EU EN / DIN 1.0503 Billets

EU EN / DIN 1.0503 Blooms

EU EN / DIN 1.0503 Concast CC Billets

EU EN / DIN 1.0503 Bar

EU EN / DIN 1.0503 Round Bars

EU EN / DIN 1.0503 Flat Bars

EU EN / DIN 1.0503 Square Bars

EU EN / DIN 1.0503 Hexagonal Bars

EU EN / DIN 1.0503 Rectangular Bars

EU EN / DIN 1.0503 Forged Bars

EU EN / DIN 1.0503 Rolled Bars

EU EN / DIN 1.0503 Black Bars

EU EN / DIN 1.0503 Bright Bars

EU EN / DIN 1.0503 Peeled Bars

EU EN / DIN 1.0503 Machined Bars

EU EN / DIN 1.0503 Hollow Bars

EU EN / DIN 1.0503 Blocks

EU EN / DIN 1.0503 Slabs

EU EN / DIN 1.0503 Shafts

EU EN / DIN 1.0503 Rings

EU EN / DIN 1.0503 Forged Seamless Rings

EU EN / DIN 1.0503 Rolled Seamless Rings

EU EN / DIN 1.0503 Hollow Rings

EU EN / DIN 1.0503 Forgings

EU EN / DIN 1.0503 Machined Parts

EU EN / DIN 1.0503 Welded Components

Carbon Steel C45 Plate

Carbon Steel C45 Circles

Carbon Steel C45 Sheets

Carbon Steel C45 Patti

Carbon Steel C45 Patta

Carbon Steel C45 Plate Shapes

Carbon Steel C45 Custom Profiles

Carbon Steel C45 Billets

Carbon Steel C45 Blooms

Carbon Steel C45 Concast CC Billets

Carbon Steel C45 Bar

Carbon Steel C45 Round Bars

Carbon Steel C45 Flat Bars

Carbon Steel C45 Square Bars

Carbon Steel C45 Hexagonal Bars

Carbon Steel C45 Rectangular Bars

Carbon Steel C45 Forged Bars

Carbon Steel C45 Rolled Bars

Carbon Steel C45 Black Bars

Carbon Steel C45 Bright Bars

Carbon Steel C45 Peeled Bars

Carbon Steel C45 Machined Bars

Carbon Steel C45 Hollow Bars

Carbon Steel C45 Blocks

Carbon Steel C45 Slabs

Carbon Steel C45 Shafts

Carbon Steel C45 Rings

Carbon Steel C45 Forged Seamless Rings

Carbon Steel C45 Rolled Seamless Rings

Carbon Steel C45 Hollow Rings

Carbon Steel C45 Forgings

Carbon Steel C45 Machined Parts

Carbon Steel C45 Welded Components

Carbon Steel S45C Plate

Carbon Steel S45C Circles

Carbon Steel S45C Sheets

Carbon Steel S45C Patti

Carbon Steel S45C Patta

Carbon Steel S45C Plate Shapes

Carbon Steel S45C Custom Profiles

Carbon Steel S45C Billets

Carbon Steel S45C Blooms

Carbon Steel S45C Concast CC Billets

Carbon Steel S45C Bar

Carbon Steel S45C Round Bars

Carbon Steel S45C Flat Bars

Carbon Steel S45C Square Bars

Carbon Steel S45C Hexagonal Bars

Carbon Steel S45C Rectangular Bars

Carbon Steel S45C Forged Bars

Carbon Steel S45C Rolled Bars

Carbon Steel S45C Black Bars

Carbon Steel S45C Bright Bars

Carbon Steel S45C Peeled Bars

Carbon Steel S45C Machined Bars

Carbon Steel S45C Hollow Bars

Carbon Steel S45C Blocks

Carbon Steel S45C Slabs

Carbon Steel S45C Shafts

Carbon Steel S45C Rings

Carbon Steel S45C Forged Seamless Rings

Carbon Steel S45C Rolled Seamless Rings

Carbon Steel S45C Hollow Rings

Carbon Steel S45C Forgings

Carbon Steel S45C Machined Parts

Carbon Steel S45C Welded Components

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of AISI 1045 / 1.0503 / C45 Round Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc. 

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Alloy Steel Bar, Alloy Steel Round Bars Manufacturer, supplier, exporter, trader, wholesaler, stockiest in India

Alloy Steel Bars Manufacturer are steels that are alloyed with a variety of elements in total amounts from 0.5% to 50% by weight. Alloy Steel Bars Manufacturer can be categorized into engineering steel (EN Steel), Nitriding Steel, Case Hardening Steel, Oil & Gas Steel, Alloy Spring Steel Bar. Alloy Steel Bars Manufacturer & Supplier can be avail as Concast (CC), Rolled, Forged in normalized, annealed, air or oil hardened (quenched) & tempered condition with black, bright, ground, peeled, proof machined finish. Client can avail VACUUM DEGASSING (VD) route Alloy Steel Bars Manufacturer, Round Bar, Flat Bar, Square Bar, Rectangular Bar, Hollow Bar, Rolled Bar, Forged Bar, Annealed Bar, Hardened & Tempered Bar, Round Corner Bars (RCS), Square Corner Bars (SCS), Rod, Hollow Rods.

Alloy Steel Rolled Bar Manufacturing Process Route:

IF (Induction Furnace) -> Ladle Refining Furnace (LRF) -> Vacuum Degassing (VD) -> Continuous Casting (CC) -> Rolling -> Normalized or Annealed & Hardened (Quenched) & Tempered (HT / QT)-> Ultra Sonic Testing (UT) -> Machining -> Marking -> Final Inspection -> Packaging -> Dispatch

Alloy Steel Forged Bar Manufacturing Process Route:

IF (Induction Furnace) -> Ladle Refining Furnace (LRF) -> Vacuum Degassing (VD) -> Bar Processing (BP) -> Forging -> Normalized or Annealed & Hardened (Quenched) & Tempered (HT / QT) -> Ultra Sonic Testing (UT) -> Machining -> Marking -> Final Inspection -> Packaging -> Dispatch

Cold Drawn or Hot Rolled alloy steel bars are typically annealed or heat treated (quenched and tempered), depending on end use. Heat treating is employed to attain required mechanical properties, typically at the expense of machinability. Heat treated bars are often stress relieved in order to have more precise control of these mechanical properties. 

Alloy has the ability to increase a steel’s hardenability (the depth of hardness that a steel can achieve) through heat treating. Alloying elements do not make the steel inherently any harder; instead they increase the depth to which the steel will harden, enhancing mechanical properties often through the full cross-section of the steel.

This makes it possible to obtain desired mechanical properties in larger sections and use less severe quenching means. This depth of hardness is determined by the alloy elements and type of heat treating used. Other characteristics of alloy steel bars are high strength, fatigue resistance, wear resistance, and toughness. 

Continuous casting, also called strand casting, is the process whereby molten metal is solidified into a “semifinished” billet, bloom, or slab for subsequent rolling in the finishing mills.Prior to the introduction of continuous casting in the 1950s, steel was poured into stationary molds to form ingots. Since then, “continuous casting” has evolved to achieve improved yield, quality, productivity and cost efficiency. It allows lower-cost production of metal sections with better quality, due to the inherently lower costs of continuous, standardised production of a product, as well as providing increased control over the process through automation. This process is used most frequently to cast steel (in terms of tonnage cast). Aluminium and copper are also continuously cast.

Hot Rolled Alloy Steel Bars Supplier are typically annealed or heat treated (quenched and tempered), depending on the end use. Heat treating is employed to attain required mechanical properties, typically at the expense of machinability. Heat treated bars are often stress relieved in order to have more precise control of these mechanical properties. 

It can be ordered as Cold Drawn or Hot Rolled. Cold drawn alloy bars will have a better surface condition and restricted tolerances.

Cold Drawn Alloy Steel Bars Manufacturer are typically annealed or heat treated (quenched and tempered), depending on the end use. Heat treating is employed to attain required mechanical properties, typically at the expense of machinability. Heat treated bars are often stress relieved in order to have more precise control of these mechanical properties. It can be ordered as Cold Drawn or Hot Rolled. Cold Drawn will have a better surface condition and tighter dimensional tolerances as well as increased tensile and yield.

Size Specifications for AlloySteel Billet: 125 x 125, 160 x 160, 200 x 200mm

Size Specifications for Alloy Steel Round Bar & Rods: 6mm upto 550mm

Size Specifications for Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length (can be customized)

Size Specifications for Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Specifications for Alloy Steel Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of Alloy Steel Bars online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

Various grades alloy steel bars that can be avail from us are as mentioned below:

CES Name		UK	UN	USA	Germany		France	Italy	Japan	Russia
AISI	ASTM	New BS	ISO	UNS	DIN	W.-Nr.	AFNOR	UNI	JIS	GOST
3140	640M40	EN111	G31400							40ChN
4037	605A37	EN16	G40370		1.5432	42MnMo7				35MLS
4042			G40420
4130	708A30		G41300		1.7218	25CrMo4	30CD4	30CrMo4	SCM420	30ChM
4140	708M40	EN19A	G41400	42CrMo4KD	1.7225	42CrMo4	42CD4	41CrMo4	SCM440	38ChM
4150	708A47		G41500		1.7228	50CrMo4	50SCD6		SCM445(H)	50Ch4
4320	820M17	EN354	G43200			15NiVCr1Mo15	20NCD7	20NiCrMo7	SNCM420	20ChN2M
4340	817M40	EN24	G43400		1.6565	40NiCrMo6		40NiCrMo7	SNCM439
4620	665A19	EN34	G46200				2ND8			20N2M
4820			G48200
5015	523A14	EN206				15Cr3	15Cr65
5046			G50460	46Cr1KD	1.3561	44Cr2	42C2	45Cr2
50B46			G50461
50B60			G50601
5120						16MnCr5
5130	530A30	EN18A	G51300		1.8401	30MnCrTi5	28C4	17Mn1Cr95	SCr430	30Ch
5140	530A40	EN18	G51400	41Cr4KD	1.7035	41Cr4	42C4	41Cr4	SCr440	40Ch
5150	BW2		G51500		1.8404	60MnCrTi4				50Ch
5160	527A60	EN48	G51600		1.2125	65MnCr4			SUP9A	60S2ChA
51B60			G51601
6150	735A50	EN47	G61500		1.8159	GS-50CrV4	50CV4	50CrV4	SUP10	50ChF
81B45			G81451
8620	805M20	EN362	G86200	20NiCrMo2KD	1.6522	20NiCrMo2	20NCD2	20NiCrMo2	SNCM220H	AS20ChGNM
8630			G86300		1.6545	30NiCrMo22	30NCD2	30NiCrMo2KB
8640	945A40	EN100C	G86400		1.6546	40NiCrMo22	40NCD2	40NiCrMo2	SNCM240	38ChGNM
86B45			G86451
8650			G86500
8660	805A60		G86600
8740	3111, Type 7		G87400	40NiCrMo2KD
9255	250A53	EN45	G92550				55S7	55Si8		55S2
9260	250A61	EN45A	G92600				60S7		SUP7	60S2
9310	832M13	EN36C	G93100		1.6657	14NiCrMo13-4	16NCD13	15NiCrMo13
94B30			G94301
835A15	835M15	EN39B			1.6723		16NCD17
1024	150M19	EN14A			1.5065
			F26	A204 Gr.A	1.5415	15Mo3	15D3	15Mo3	STBA12
A387 Grade P1	A182 Grade F1 Class 1	1503-243B	P26	K12822	1.5415	16Mo3		16Mo3
A387 Grade P5	A182 Grade F5			K41545	1.7362	12CrMo195		X12CrMo5		15KH5M
A387 Grade P9	A182 Grade F9			K90941	1.7386	12CrMo91		X11CrMo9-1
A387 Grade P11	A182 Grade F11 Class 2		F32	K11572	1.7335	13CrMo44		14CrMo4-5
A387 Grade P12	A182 Grade F12 Class 2		P32			13CrMo4-4	15CD4-5		SFVAF12	12KHM
A387 Grade P22	A182 Grade F22 Class 3	622Gr.31		K21590	1.7380	10CrMo9-10	10CD9-10	F34	SCMV4	10KH2M
A387 Grade P91	A182 Grade F91				1.4903	10CrMoVNb9-1		X10CrMoVNb9-1
	A350 LF3			K32025	1.5637	10Ni14		12Ni14
	A350 LF6 Class 1
	A350 LF6 Class 2
		EN353		815M17		15NiCr1Mo12
52100		EN31				100Cr6	103Cr1

Other possible grades are as mentioned below:

EN 18CrNiMo7-6, 17CrNiMo6, DIN 1.6587, 17CrNiMo6-7, EN 34CrNiMo6, UNI 35CrNiMo6KB, etc.

Other Possible products in Alloy Steel are mentioned below:

Alloy Steel Bars Manufacturer

Alloy Steel Bars Manufacturer in Mumbai

Alloy Steel Bars Manufacturer in India

Alloy Steel Bars Supplier

Alloy Steel Bars Supplier in Mumbai

Alloy Steel Bars Supplier in India

Alloy Steel Billet
Alloy Steel Concast Billet
Alloy Steel Round Billet
Alloy Steel Square Billet
Alloy Steel Bar (IBR Quality Approved)
Alloy Steel Round Bar (IBR Quality approved)
Alloy Steel Flat Bar
Alloy Steel Square Bar
Alloy Steel Round Corner Square Bar
Alloy Steel RCS Bar
Alloy Steel Straight Corner Square Bar
Alloy Steel SCS Bar
Alloy Steel Hexagonal Bar
Alloy Steel Hollow Bar
Alloy Steel Hex Bar
Alloy Steel Concast Bar
Alloy Steel Forged Bar (IBR Quality Approved)
Alloy Steel Rolled Bar (IBR Quality Approved)
Alloy Steel Black Bar
Alloy Steel Bright Bar
Alloy Steel Peeled Bar
Alloy Steel Machined Bar (Proof Machined)
Alloy Steel Annealed Bar (Spheroidized Annealed)
Alloy Steel Hardened & Tempered (HT) Bar
Alloy Steel Quenched & Tempered (QT) Bar
Alloy Steel Blocks (Square, Rectangular)
Alloy Steel Slabs
Alloy Steel Shafting (Shafts)
Alloy Steel Plate
Alloy Steel Sheet
Alloy Steel Coil
Alloy Steel Circle
Alloy Steel Strip
Alloy Steel Ring (Seamless, Welded, Forged, Rolled)
Alloy Steel Forged Ring (Seamless, Welded)
Alloy Steel Rolled Ring (Seamless, Welded)
Alloy Steel Seamless Ring (Forged, Rolled)
Alloy Steel Welded Ring (Forged, Rolled)
Alloy Steel Tube (Seamless, Welded, IBR, ASTM, ASME)
Alloy Steel Tubing (Seamless, Welded, IBR, ASTM, ASME)
Alloy Steel Pipe (Seamless, Welded, IBR, ASTM, ASME)
Alloy Steel Flange (IBR Approved, ASTM, ASME, API, DIN)
Alloy Steel Slip-On Flange (SO, SORF, SOFF)
Alloy Steel Weld Neck Flange (WN, WNRF, WNFF, WNRTJ)
Alloy Steel Weld necking Flange (WN, WNRF, WNFF, WNRTJ)
Alloy Steel Blind Flange (BL, BLRF, BLFF, BLRTJ)
Alloy Steel Socket weld Flange (SW, SWFF, SWRF, SWRTJ)
Alloy Steel Socket welding Flange (SW, SWFF, SWRF, SWRTJ)
Alloy Steel Threaded Flange (TH, THFF, THRF, THRTJ)
Alloy Steel Lap joint Flange (LJ, LJFF, LJRF)
Alloy Steel Long weld neck Flange (LWN, LWNFF, LWNRF)
Alloy Steel Spectacle Blind Flange
Alloy Steel Plate Flange
Alloy Steel Hub Flange
Alloy Steel Flat Face Flange (FF)
Alloy Steel Raised Face Flange (RF)
Alloy Steel Ring Type Joint Flange (RTJ)
Alloy Steel Flange (CLASS 150, 300, 400, 600, 900, 1500, 2500)
Alloy Steel Fitting
Alloy Steel Buttweld Fitting
Alloy Steel Socket weld Fitting
Alloy Steel Threaded Fitting
Alloy Steel Screwed Fitting
Alloy Steel O'let Fitting
Alloy Steel Branch Connections
Alloy Steel Elbow (Seamless, Welded, 45, 90, 180 Degree, Long, Short Radius)
Alloy Steel Tee (Straight, Reducing, Equal, Unequal)
Alloy Steel Reducer (Concentric, Eccentric)
Alloy Steel Cross (Straight, Reducing)
Alloy Steel Stub In & Stub End (Long, Saddle -Wrap Around)
Alloy Steel Lateral
Alloy Steel End Cap
Alloy Steel Bends
Alloy Steel Swage (Concentric, Eccentric)
Alloy Steel Coupling (Half, Full)
Alloy Steel Street Elbow
Alloy Steel Bushing
Alloy Steel Plug (Round, Square, Hexagon)
Alloy Steel Union
Alloy Steel Hammer Union
Alloy Steel Nipple
Alloy Steel Weldolet (Heavy Wall, Insert, Reducing, Flat)
Alloy Steel Thredolet (Reducing, Flat)
Alloy Steel Threadolet (Reducing, Flat)
Alloy Steel Sockolet (Reducing, Flat)
Alloy Steel Couplet (Female Threaded)
Alloy Steel Elbolet
Alloy Steel Latrolet
Alloy Steel Nipolet
Alloy Steel Sweepolet
Alloy Steel Brazolet
Alloy Steel Expanded Olet
Alloy Steel Flanged Olet
Alloy Steel Flexolet
Alloy Steel Fasteners
Alloy Steel Stud
Alloy Steel Bolt
Alloy Steel Screws
Alloy Steel Nut
Alloy Steel Washer
Alloy Steel Forgings
Alloy Steel Machined Part
Alloy Steel Welded Compenents
Alloy Steel Welding Consumables
Alloy Steel Filler Metal Wire Rod

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Alloy Steel Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc. 

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Tool Steel D3 Round Bars & Flat Bars supplier, exporter, trader, wholesaler, stockiest.

D3 steel, also know as 1.2080 (Werkstoff), is an air hardening, high-carbon, high-chromium tool steel. It displays excellent abrasion/wear resistance and has good dimensional stability and high compressive strength.

It is heat treatable and will offer a hardness in the range 58-64 HRC. Due to its abrasion resistance in the hardened condition, D3 machining should be limited to finished grinding.

Size Specifications for D3 Tool Steel Round Bars: 6mm upto 200mm

Size Specifications for D3 Tool Steel Square, Flat, Rectangular Bars: 6mm upto 55mm in thickness, 500mm to 6000mm length(can be Customized)

Size Specifications for D3 Tool Steel Hollow Bars: 50mm upto 200mm in diameter as welded hollow bars & 2inch to 8inch diameter as seamless hollow bars

Size Specifications for D3 Tool Steel Hollow Rings: 50mm upto 1000mm in diameter as welded hollow rings & 2inch to 30inch diameter as seamless hollow rings

Chemical Composition (Chemistry) of Tool Steel D3 Round Bars & Flat Bars:

C	Si	Mn	P	S	Cr
1.9 - 2.2	0.1 - 0.6	0.2 - 0.6	max   0.03	max   0.03	11 -13

Different Designations of Tool Steel D3:

EU EN: X210Cr12

DIN, WNr: X210Cr12

France: AFNOR Z 200 C 12

Germany: DIN 1.2080 

Italy: UNI X 21O Cr 13 KU, X205Cr12KU

China GB: Cr12

Japan: JIS SKD1 

United Kingdom: B.S. BD 3 

United States: ASTM A681, FED QQ-T-570, SAE J437, SAE J438, UNS T30403

Poland PN: NC11

Czechia CSN: 19436

Austria ONORM: K100

Russia GOST: KH12

Inter ISO: x210Cr12

Typical applications for D3 Tool Steel:

Blanking and forming dies, Forming rolls, Press tools, Punches, Bushes

Client can procure smaller quantities of Tool Steel D3 Round Bars & Flat Bars online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Annealing properties of Tool Steel D3:

Heat uniformly to 850-870°C, soak thoroughly, then slow furnace cool at a rate of not more than 25°C per hour to 650°C. The parts may then be air cooled. This should result in a maximum hardness of brinell 248.

Hardening properties of Tool Steel D3:

D3 tool steel is extremely sensitive to overheating during hardening – do not overheat.

Pre heat slowly to 800-850°C, the raise rapidly to 950-970°C and soak until completely equalised. Quench in oil.

Stress Relieving properties of Tool Steel D3:

Heat to 650-700ºC. Soak for 2-4 hours then furnace cool.

Tempering properties of Tool Steel D3:

Heat uniformly and thoroughly to the desired temperature and hold for 25 minutes per cm of thickness. D3 can be double tempered after intermediate cooling to room temperature.

 

Other Possible products in Tool Steel D3 are mentioned below:

Tool Steel D3 Plate

Tool Steel D3 Circles

Tool Steel D3 Strips

Tool Steel D3 Sheets

Tool Steel D3 Plate Shapes

Tool Steel D3 Custom Profiles

Tool Steel D3 Billets

Tool Steel D3 Bars

Tool Steel D3 Round Bars

Tool Steel D3 Flat Bars

Tool Steel D3 Square Bars

Tool Steel D3 Rectangular Bars

Tool Steel D3 Hollow Bars

Tool Steel D3 Forged Bars

Tool Steel D3 Machined Bars

Tool Steel D3 Bars Offcuts

Tool Steel D3 Bars Cut Pieces

Tool Steel D3 Slabs

Tool Steel D3 Blocks

Tool Steel D3 Rings

Tool Steel D3 Forged Seamless Rings

Tool Steel D3 Rolled Seamless Rings

Tool Steel D3 Forgings

Tool Steel D3 Machined Parts

DIN 1.2080 Tool Steel Plate

DIN 1.2080 Tool Steel Circles

DIN 1.2080 Tool Steel Strips

DIN 1.2080 Tool Steel Sheets

DIN 1.2080 Tool Steel Plate Shapes

DIN 1.2080 Tool Steel Custom Profiles

DIN 1.2080 Tool Steel Billets

DIN 1.2080 Tool Steel Bars

DIN 1.2080 Tool Steel Round Bars

DIN 1.2080 Tool Steel Flat Bars

DIN 1.2080 Tool Steel Square Bars

DIN 1.2080 Tool Steel Rectangular Bars

DIN 1.2080 Tool Steel Hollow Bars

DIN 1.2080 Tool Steel Forged Bars

DIN 1.2080 Tool Steel Machined Bars

DIN 1.2080 Tool Steel Bars Offcuts

DIN 1.2080 Tool Steel Bars Cut Pieces

DIN 1.2080 Tool Steel Slabs

DIN 1.2080 Tool Steel Blocks

DIN 1.2080 Tool Steel Rings

DIN 1.2080 Tool Steel Forged Seamless Rings

DIN 1.2080 Tool Steel Rolled Seamless Rings

DIN 1.2080 Tool Steel Forgings

DIN 1.2080 Tool Steel Machined Parts

Tool Steel X210Cr12 Plate

Tool Steel X210Cr12 Circles

Tool Steel X210Cr12 Strips

Tool Steel X210Cr12 Sheets

Tool Steel X210Cr12 Plate Shapes

Tool Steel X210Cr12 Custom Profiles

Tool Steel X210Cr12 Billets

Tool Steel X210Cr12 Bars

Tool Steel X210Cr12 Round Bars

Tool Steel X210Cr12 Flat Bars

Tool Steel X210Cr12 Square Bars

Tool Steel X210Cr12 Rectangular Bars

Tool Steel X210Cr12 Hollow Bars

Tool Steel X210Cr12 Forged Bars

Tool Steel X210Cr12 Machined Bars

Tool Steel X210Cr12 Bars Offcuts

Tool Steel X210Cr12 Bars Cut Pieces

Tool Steel X210Cr12 Slabs

Tool Steel X210Cr12 Blocks

Tool Steel X210Cr12 Rings

Tool Steel X210Cr12 Forged Seamless Rings

Tool Steel X210Cr12 Rolled Seamless Rings

Tool Steel X210Cr12 Forgings

Tool Steel X210Cr12 Machined Parts

Tool Steel SKD1 Plate

Tool Steel SKD1 Circles

Tool Steel SKD1 Strips

Tool Steel SKD1 Sheets

Tool Steel SKD1 Plate Shapes

Tool Steel SKD1 Custom Profiles

Tool Steel SKD1 Billets

Tool Steel SKD1 Bars

Tool Steel SKD1 Round Bars

Tool Steel SKD1 Flat Bars

Tool Steel SKD1 Square Bars

Tool Steel SKD1 Rectangular Bars

Tool Steel SKD1 Hollow Bars

Tool Steel SKD1 Forged Bars

Tool Steel SKD1 Machined Bars

Tool Steel SKD1 Bars Offcuts

Tool Steel SKD1 Bars Cut Pieces

Tool Steel SKD1 Slabs

Tool Steel SKD1 Blocks

Tool Steel SKD1 Rings

Tool Steel SKD1 Forged Seamless Rings

Tool Steel SKD1 Rolled Seamless Rings

Tool Steel SKD1 Forgings

Tool Steel SKD1 Machined Parts

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Tool Steel D3 Round Bars & Flat Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.