Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Steel Flanges supplier, exporter, trader, wholesaler, stockiest.

A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.

Size range of Steel Flanges: ½” to 24” (Ready Stock). Above 24” on make to order basis.

Nominal Pressure Range of Steel Flanges: #150, #300, #400, #600, #900, #1500, #2500

Schedule of Steel Flanges: 5S, 10S, 20S, 40S, STD, 60, 80S, XS, 100, 120, 140, 160, XXS 

Face Type of Steel Flanges:Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) 

Material Type of Steel Flanges: Mild Steel (MS), Carbon Steel (CS), Chrome-Molybdenum Alloy Steel, Stainless Steel (SS), Duplex Stainless Steel (DSS), Super Duplex Stainless Steel (SDSS), Inconel, Incoloy, Hastelloy, Monel, Titanium, Copper Nickel

Different Standard of Steel Flanges:

ANSI B16.5, ANSI / ASME B16.36, ANSI / ASME B16.48, ASME B16.47 Series A, ASME B16.47 Series B, API 6A Type 6B, API 6A Type 6BX, AWWA C207, DIN, DIN 2527, DIN 2543, DIN 2544, DIN 2545, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2502, DIN 2503, DIN 2573, DIN 2576, DIN 2565, DIN 2566, DIN 2627, DIN 2628, DIN 2629, DIN 2630, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638, EN1092-1 Type 01, EN1092-1 Type 05, EN1092-1 Type 11

Client can procure smaller quantities of Steel Flange products online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Other Possible products in Steel Flanges are mentioned below:

ANSI B16.5 Class 150 Flanges

ANSI B16.5 Class 300 Flanges

ANSI B16.5 Class 400 Flanges

ANSI B16.5 Class 600 Flanges

ANSI B16.5 Class 900 Flanges

ANSI B16.5 Class 1500 Flanges

ANSI B16.5 Class 2500 Flanges

ANSI B16.36 Class 300 Flanges

ANSI B16.36 Class 400 Flanges

ANSI B16.36 Class 600 Flanges

ANSI B16.36 Class 900 Flanges

ANSI B16.36 Class 1500 Flanges

ANSI B16.36 Class 2500 Flanges

ANSI B16.48 Class 150 Flanges

ANSI B16.48 Class 300 Flanges

ANSI B16.48 Class 400 Flanges

ANSI B16.48 Class 600 Flanges

ANSI B16.48 Class 900 Flanges

ANSI B16.48 Class 1500 Flanges

ANSI B16.48 Class 2500 Flanges

ASME B16.47 Class 150 Series A Flanges

ASME B16.47 Class 300 Series A Flanges

ASME B16.47 Class 400 Series A Flanges

ASME B16.47 Class 600 Series A Flanges

ASME B16.47 Class 900 Series A Flanges

ASME B16.47 Class 75 Series B Flanges

ASME B16.47 Class 150 Series B Flanges

ASME B16.47 Class 300 Series B Flanges

ASME B16.47 Class 400 Series B Flanges

ASME B16.47 Class 600 Series B Flanges

ASME B16.47 Class 900 Series B Flanges

API 6A Type 6B 2000 PSI Flanges

API 6A Type 6B 3000 PSI Flanges

API 6A Type 6B 5000 PSI Flanges

API 6A Type 6BX 2000 PSI Flanges

API 6A Type 6BX 3000 PSI Flanges

API 6A Type 6BX 5000 PSI Flanges

API 6A Type 6BX 10000 PSI Flanges

API 6A Type 6BX 15000 PSI Flanges

API 6A Type 6BX 20000 PSI Flanges

Industry Standard Class 75 Flanges

Industry Standard Class 125 Flanges

Industry Standard Class 150 Flanges

Industry Standard Class 175 Flanges

Industry Standard Class 250 Flanges

Industry Standard Class 300 Flanges

Industry Standard Class 350 Flanges

Table 2 AWWA C207 Class B Flanges

Table 2 AWWA C207 Class D Flanges

Table 3 AWWA C207 Class D Flanges

Table 4 AWWA C207 Class E Flanges

Table 5 AWWA C207 Class E Flanges

Table 6 AWWA C207 Class F Flanges

DIN 2543 PN 16 Flanges

DIN 2544 PN25 Flanges

DIN 2545 PN40 Flanges

DIN 2641 PN6 Flanges

DIN 2642 PN10 Flanges

DIN 2655 PN25 Flanges

DIN 2656 PN40 Flanges

DIN 2502 PN16 Flanges

DIN 2503 PN25 Flanges

DIN 2503 PN40 Flanges

DIN 2573 PN6 Flanges

DIN 2576 PN10 Flanges

DIN 2565 PN6 Flanges

DIN 2566 PN10 & PN16 Flanges

DIN 2566 PN25 & PN40 Flanges

DIN 2627 PN400 Flanges

DIN 2628 PN250 Flanges

DIN 2629 PN320 Flanges

DIN 2630 PN2.5 Flanges

DIN 2631 PN6 Flanges

DIN 2632 PN10 Flanges

DIN 2633 PN16 Flanges

DIN 2634 PN25 Flanges

DIN 2635 PN40 Flanges

DIN 2636 PN64 Flanges

DIN 2637 PN100 Flanges

DIN 2638 PN160 Flanges

DIN 2527 PN6 Flanges

DIN 2527 PN10 Flanges

DIN 2527 PN16 Flanges

DIN 2527 PN25 Flanges

DIN 2527 PN40 Flanges

DIN 2527 PN64 Flanges

DIN 2527 PN100 Flanges

EN1092-1 Type 01 Flanges

EN1092-1 Type 05 Flanges

EN1092-1 Type 11 Flanges

Weld Neck Flanges

Slip On Flanges

Blind Flanges

Socket Weld Flanges

Lap Joint Flanges

Threaded Flanges

Long Weld Neck Flanges

Spectacle Blind Flanges

Orifice Flanges

Flat Face (FF) Flanges

Raised Face (RF) Flanges

Ring Type Joint (RTJ) Flanges

Plate Flanges

Collar Flanges

Mild Steel (MS) Flanges

Carbon Steel (CS) Flanges

Chrome-Molybdenum Alloy Steel Flanges

Stainless Steel (SS) Flanges

Duplex Stainless Steel (DSS) Flanges

Super Duplex Stainless Steel (SDSS) Flanges

Inconel Flanges

Incoloy Flanges

Hastelloy Flanges

Monel Flanges

Titanium Flanges

Copper Nickel Flanges

Mild Steel (MS) Flat Face (FF) Flanges

Carbon Steel (CS) Flat Face (FF) Flanges

Chrome-Molybdenum Alloy Steel Flat Face (FF) Flanges

Stainless Steel (SS) Flat Face (FF) Flanges

Duplex Stainless Steel (DSS) Flat Face (FF) Flanges

Super Duplex Stainless Steel (SDSS) Flat Face (FF) Flanges

Inconel Flat Face (FF) Flanges

Incoloy Flat Face (FF) Flanges

Hastelloy Flat Face (FF) Flanges

Monel Flat Face (FF) Flanges

Titanium Flat Face (FF) Flanges

Copper Nickel Flat Face (FF) Flanges

Mild Steel (MS) Raised Face (RF) Flanges

Carbon Steel (CS) Raised Face (RF) Flanges

Chrome-Molybdenum Alloy Steel Raised Face (RF) Flanges

Stainless Steel (SS) Raised Face (RF) Flanges

Duplex Stainless Steel (DSS) Raised Face (RF) Flanges

Super Duplex Stainless Steel (SDSS) Raised Face (RF) Flanges

Inconel Raised Face (RF) Flanges

Incoloy Raised Face (RF) Flanges

Hastelloy Raised Face (RF) Flanges

Monel Raised Face (RF) Flanges

Titanium Raised Face (RF) Flanges

Copper Nickel Raised Face (RF) Flanges

Mild Steel (MS) Ring Type Joint (RTJ) Flanges

Carbon Steel (CS) Ring Type Joint (RTJ) Flanges

Chrome-Molybdenum Alloy Steel Ring Type Joint (RTJ) Flanges

Stainless Steel (SS) Ring Type Joint (RTJ) Flanges

Duplex Stainless Steel (DSS) Ring Type Joint (RTJ) Flanges

Super Duplex Stainless Steel (SDSS) Ring Type Joint (RTJ) Flanges

Inconel Ring Type Joint (RTJ) Flanges

Incoloy Ring Type Joint (RTJ) Flanges

Hastelloy Ring Type Joint (RTJ) Flanges

Monel Ring Type Joint (RTJ) Flanges

Titanium Ring Type Joint (RTJ) Flanges

Copper Nickel Ring Type Joint (RTJ) Flanges

Mild Steel (MS) ASTM A350 LF2 Flanges

Carbon Steel (CS) ASTM A105 / A105N Flanges

Chrome Moly Alloy Steel ASTM A182 F1 Flanges

Chrome Moly Alloy Steel ASTM A182 F5 Flanges

Chrome Moly Alloy Steel ASTM A182 F9 Flanges

Chrome Moly Alloy Steel ASTM A182 F11 Flanges

Chrome Moly Alloy Steel ASTM A182 F12 Flanges

Chrome Moly Alloy Steel ASTM A182 F22 Flanges

Chrome Moly Alloy Steel ASTM A182 F91 Flanges

Stainless Steel (SS) 304, 304L, 304H Flanges

Stainless Steel (SS) 316, 316L, 316H Flanges

Duplex Stainless Steel (DSS) 2205, F51, UNS S31803 Flanges

Super Duplex Stainless Steel (SDSS) 2507, F53, UNS S32750 Flanges

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Steel Flanges from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc. 

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Threaded Pipe Fittings supplier, exporter, trader, wholesaler, stockiest.

A threaded pipe fitting is one where the pipe is threaded into a recessed area of the fitting. To make a threaded fitting, a threaded connection is cut into the pipe and the fitting.  Typically, the male end of the thread is attributed to the pipe and the female end is the fitting.

Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.
The dimensional standards for taper pipe threads are given in ASME B1.20.1. That document gives all required dimensions including number of threads per inch, pitch diameter, and normal engagement lengths for all pipe diameters.

 

Types of Threaded Fittings:

Lateral - ANSI Class 3000, Lateral - ANSI Class 6000

Tee - Straight, ANSI Class 2000, Tee - Straight, ANSI Class 3000, Tee - Straight, ANSI Class 6000

Cap - Round, ANSI Class 3000, Cap - Round, ANSI Class 6000

Reducer - ANSI Class 3000, Reducer - ANSI Class 6000

Elbow - 45 Degree ANSI Class 2000, Elbow - 45 Degree ANSI Class 3000, Elbow - 45 Degree ANSI Class 6000, Elbow - 90 Degree ANSI Class 2000, Elbow - 90 Degree ANSI Class 3000, Elbow - 90 Degree ANSI Class 6000

Street Elbow - ANSI Class 3000, Street Elbow - ANSI Class 6000

Swage - Concentric/Eccentric

Coupling - Half ANSI Class 3000, Coupling - Half ANSI Class 6000

Coupling - Full ANSI Class 3000, Coupling - Full ANSI Class 6000

Cross - Straight ANSI Class 2000, Cross - Straight ANSI Class 3000, Cross - Straight ANSI Class 6000

Union - ANSI Class 3000, Union - ANSI Class 6000

Bushing – Flush, Bushing – Hexagon

Plug - Hexagon Head, Plug - Round Head, Plug - Square Head

Size Range for Threaded Fittings: ½” to 4” inch from Ready Stock. Above 4” on make to order basis depending on raw material availability.

Client can procure smaller quantities of Threaded Pipe Fitting products online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Advantages of Threaded Pipe Fittings:

Installation productivity is moderately high, and specialized installation skill requirements are not extensive.

Leakage integrity is good for low-pressure, low-temperature installations where vibration is not encountered.

 

Possible products in Threaded Pipe Fittings are mentioned below:

Mild Steel (MS) Threaded (Screwed) Pipe Fittings

Carbon Steel (CS) Threaded (Screwed) Pipe Fittings

Chrome-Molybdenum Alloy Steel Threaded (Screwed) Pipe Fittings

Stainless Steel (SS) Threaded (Screwed) Pipe Fittings

Duplex Stainless Steel (DSS) Threaded (Screwed) Pipe Fittings

Super Duplex Stainless Steel (SDSS) Threaded (Screwed) Pipe Fittings

Nickel Threaded (Screwed) Pipe Fittings

Inconel Threaded (Screwed) Pipe Fittings

Incoloy Threaded (Screwed) Pipe Fittings

Hastelloy Threaded (Screwed) Pipe Fittings

Monel Threaded (Screwed) Pipe Fittings

Titanium Threaded (Screwed) Pipe Fittings

Copper Nickel Threaded (Screwed) Pipe Fittings

Threaded (Screwed) Fittings

Threaded (Screwed) Lateral - ANSI Class 3000

Threaded (Screwed) Lateral - ANSI Class 6000

Threaded (Screwed) Tee - Straight, ANSI Class 2000

Threaded (Screwed) Tee - Straight, ANSI Class 3000

Threaded (Screwed) Tee - Straight, ANSI Class 6000

Threaded (Screwed) Cap - Round, ANSI Class 3000

Threaded (Screwed) Cap - Round, ANSI Class 6000

Threaded (Screwed) Reducer - ANSI Class 3000

Threaded (Screwed) Reducer - ANSI Class 6000

Threaded (Screwed) Elbow - 45 Degree, ANSI Class 2000

Threaded (Screwed) Elbow - 45 Degree, ANSI Class 3000

Threaded (Screwed) Elbow - 45 Degree, ANSI Class 6000

Threaded (Screwed) Elbow - 90 Degree, ANSI Class 2000

Threaded (Screwed) Elbow - 90 Degree, ANSI Class 3000

Threaded (Screwed) Elbow - 90 Degree, ANSI Class 6000

Threaded (Screwed) Street Elbow, ANSI Class 3000

Threaded (Screwed) Street Elbow, ANSI Class 6000

Threaded (Screwed) Swage - Concentric/Eccentric

Threaded (Screwed) Coupling - Half, ANSI Class 3000

Threaded (Screwed) Coupling - Half, ANSI Class 6000

Threaded (Screwed) Coupling - Full, ANSI Class 3000

Threaded (Screwed) Coupling - Full, ANSI Class 6000

Threaded (Screwed) Cross - Straight, ANSI Class 2000

Threaded (Screwed) Cross - Straight, ANSI Class 3000

Threaded (Screwed) Cross - Straight, ANSI Class 6000

Threaded (Screwed) Union - ANSI Class 3000

Threaded (Screwed) Union - ANSI Class 6000

Threaded (Screwed) Bushing - Flush

Threaded (Screwed) Bushing - Hexagon

Threaded (Screwed) Plug - Hexagon Head

Threaded (Screwed) Plug - Round Head

Threaded (Screwed) Plug - Square Head

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Lateral - ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Lateral - ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Tee - Straight, ANSI Class 2000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Tee - Straight, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Tee - Straight, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Cap - Round, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Cap - Round, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Reducer - ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Reducer - ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Elbow - 45 Degree, ANSI Class 2000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Elbow - 45 Degree, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Elbow - 45 Degree, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Elbow - 90 Degree, ANSI Class 2000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Elbow - 90 Degree, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Elbow - 90 Degree, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Street Elbow, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Street Elbow, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Swage - Concentric/Eccentric

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Coupling - Half, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Coupling - Half, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Coupling - Full, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Coupling - Full, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Cross - Straight, ANSI Class 2000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Cross - Straight, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Cross - Straight, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Union - ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Union - ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Bushing - Flush

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Bushing - Hexagon

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Plug - Hexagon Head

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Plug - Round Head

ASTM A350 LF2 Mild Steel (MS) Threaded (Screwed) Plug - Square Head

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Lateral - ANSI Class 3000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Lateral - ANSI Class 6000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Tee - Straight, ANSI Class 2000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Tee - Straight, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Tee - Straight, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Cap - Round, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Cap - Round, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Reducer - ANSI Class 3000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Reducer - ANSI Class 6000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Elbow - 45 Degree, ANSI Class 2000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Elbow - 45 Degree, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Elbow - 45 Degree, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Elbow - 90 Degree, ANSI Class 2000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Elbow - 90 Degree, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Elbow - 90 Degree, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Street Elbow, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Street Elbow, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Swage - Concentric/Eccentric

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Coupling - Half, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Coupling - Half, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Coupling - Full, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Coupling - Full, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Cross - Straight, ANSI Class 2000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Cross - Straight, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Cross - Straight, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Union - ANSI Class 3000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Union - ANSI Class 6000

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Bushing - Flush

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Bushing - Hexagon

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Plug - Hexagon Head

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Plug - Round Head

ASTM A105 Carbon Steel (CS) Threaded (Screwed) Plug - Square Head

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Threaded Pipe Fittings from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc. 

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Socket Weld Pipe Fittings supplier, exporter, trader, wholesaler, stockiest.

A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to butt-weld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.

To join pipe to Valves and fittings or to other sections of pipe, fillet-type seal welds be used. Socket Welded Joints construction is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations.

Fatigue resistance is lower than that in butt-welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods.

 

Types of Socket Weld Fittings:

Lateral - ANSI Class 3000, Lateral - ANSI Class 6000, Lateral - ANSI Class 9000

Tee - Straight, ANSI Class 3000, Tee - Straight, ANSI Class 6000, Tee - Straight, ANSI Class 9000

Cap - Round, ANSI Class 3000, Cap - Round, ANSI Class 6000

Reducer - ANSI Class 3000, Reducer - ANSI Class 6000, Reducer - ANSI Class 9000

Elbow - 45 Degree, ANSI Class 3000, Elbow - 45 Degree, ANSI Class 6000, Elbow - 45 Degree, ANSI Class 9000, Elbow - 90 Degree, ANSI Class 3000, Elbow - 90 Degree, ANSI Class 6000, Elbow - 90 Degree, ANSI Class 9000

Coupling - Half, ANSI Class 3000, Coupling - Half, ANSI Class 6000, Coupling - Half, ANSI Class 9000, Coupling - Full, ANSI Class 3000, Coupling - Full, ANSI Class 6000, Coupling - Full, ANSI Class 9000

Cross - Straight, ANSI Class 3000, Cross - Straight, ANSI Class 6000, Cross - Straight, ANSI Class 9000

Union - ANSI Class 3000, Union - ANSI Class 6000

Size Range for Socket Weld Fittings: ½” to 4” inch from Ready Stock. Above 4” on make to order basis depending on raw material availability.

Client can procure smaller quantities of Socket Weld Pipe Fitting products online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Advantages of Socket Weld Pipe Fittings:

The pipe need not be bevelled for weld preparation.

Temporary tack welding is no needed for alignment, because in principle the fitting ensures proper alignment.

The weld metal cannot penetrate into the bore of the pipe.

They can be used in place of threaded fittings, so the risk of leakage is much smaller.

Radiography is not practical on the fillet weld; therefore correct fitting and welding is crucial. The fillet weld may be inspected by surface examination, magnetic particle (MP), or liquid penetrate (PT) examination methods.

Construction costs are lower than with butt-welded joints due to the lack of exacting fit-up requirements and elimination of special machining for butt weld end preparation.

 

Possible products in Socket Weld Pipe Fittings are mentioned below:

Mild Steel (MS) Socket Weld Pipe Fittings

Carbon Steel (CS) Socket Weld Pipe Fittings

Chrome-Molybdenum Alloy Steel Socket Weld Pipe Fittings

Stainless Steel (SS) Socket Weld Pipe Fittings

Duplex Stainless Steel (DSS) Socket Weld Pipe Fittings

Super Duplex Stainless Steel (SDSS) Socket Weld Pipe Fittings

Nickel Socket Weld Pipe Fittings

Inconel Socket Weld Pipe Fittings

Incoloy Socket Weld Pipe Fittings

Hastelloy Socket Weld Pipe Fittings

Monel Socket Weld Pipe Fittings

Titanium Socket Weld Pipe Fittings

Copper Nickel Socket Weld Pipe Fittings

Socket Weld Fittings

Socket Weld Lateral - ANSI Class 3000

Socket Weld Lateral - ANSI Class 6000

Socket Weld Lateral - ANSI Class 9000

Socket Weld Tee - Straight, ANSI Class 3000

Socket Weld Tee - Straight, ANSI Class 6000

Socket Weld Tee - Straight, ANSI Class 9000

Socket Weld Cap - Round, ANSI Class 3000

Socket Weld Cap - Round, ANSI Class 6000

Socket Weld Reducer - ANSI Class 3000

Socket Weld Reducer - ANSI Class 6000

Socket Weld Reducer - ANSI Class 9000

Socket Weld Elbow - 45 Degree, ANSI Class 3000

Socket Weld Elbow - 45 Degree, ANSI Class 6000

Socket Weld Elbow - 45 Degree, ANSI Class 9000

Socket Weld Elbow - 90 Degree, ANSI Class 3000

Socket Weld Elbow - 90 Degree, ANSI Class 6000

Socket Weld Elbow - 90 Degree, ANSI Class 9000

Socket Weld Coupling - Half, ANSI Class 3000

Socket Weld Coupling - Half, ANSI Class 6000

Socket Weld Coupling - Half, ANSI Class 9000

Socket Weld Coupling - Full, ANSI Class 3000

Socket Weld Coupling - Full, ANSI Class 6000

Socket Weld Coupling - Full, ANSI Class 9000

Socket Weld Cross - Straight, ANSI Class 3000

Socket Weld Cross - Straight, ANSI Class 6000

Socket Weld Cross - Straight, ANSI Class 9000

Socket Weld Union - ANSI Class 3000

Socket Weld Union - ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Lateral - ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Lateral - ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Lateral - ANSI Class 9000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Tee - Straight, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Tee - Straight, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Tee - Straight, ANSI Class 9000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Cap - Round, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Cap - Round, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Reducer - ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Reducer - ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Reducer - ANSI Class 9000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Elbow - 45 Degree, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Elbow - 45 Degree, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Elbow - 45 Degree, ANSI Class 9000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Elbow - 90 Degree, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Elbow - 90 Degree, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Elbow - 90 Degree, ANSI Class 9000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Coupling - Half, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Coupling - Half, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Coupling - Half, ANSI Class 9000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Coupling - Full, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Coupling - Full, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Coupling - Full, ANSI Class 9000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Cross - Straight, ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Cross - Straight, ANSI Class 6000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Cross - Straight, ANSI Class 9000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Union - ANSI Class 3000

ASTM A350 LF2 Mild Steel (MS) Socket Weld Union - ANSI Class 6000

ASTM A105 Carbon Steel (CS) Socket Weld Lateral - ANSI Class 3000

ASTM A105 Carbon Steel (CS) Socket Weld Lateral - ANSI Class 6000

ASTM A105 Carbon Steel (CS) Socket Weld Lateral - ANSI Class 9000

ASTM A105 Carbon Steel (CS) Socket Weld Tee - Straight, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Socket Weld Tee - Straight, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Socket Weld Tee - Straight, ANSI Class 9000

ASTM A105 Carbon Steel (CS) Socket Weld Cap - Round, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Socket Weld Cap - Round, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Socket Weld Reducer - ANSI Class 3000

ASTM A105 Carbon Steel (CS) Socket Weld Reducer - ANSI Class 6000

ASTM A105 Carbon Steel (CS) Socket Weld Reducer - ANSI Class 9000

ASTM A105 Carbon Steel (CS) Socket Weld Elbow - 45 Degree, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Socket Weld Elbow - 45 Degree, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Socket Weld Elbow - 45 Degree, ANSI Class 9000

ASTM A105 Carbon Steel (CS) Socket Weld Elbow - 90 Degree, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Socket Weld Elbow - 90 Degree, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Socket Weld Elbow - 90 Degree, ANSI Class 9000

ASTM A105 Carbon Steel (CS) Socket Weld Coupling - Half, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Socket Weld Coupling - Half, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Socket Weld Coupling - Half, ANSI Class 9000

ASTM A105 Carbon Steel (CS) Socket Weld Coupling - Full, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Socket Weld Coupling - Full, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Socket Weld Coupling - Full, ANSI Class 9000

ASTM A105 Carbon Steel (CS) Socket Weld Cross - Straight, ANSI Class 3000

ASTM A105 Carbon Steel (CS) Socket Weld Cross - Straight, ANSI Class 6000

ASTM A105 Carbon Steel (CS) Socket Weld Cross - Straight, ANSI Class 9000

ASTM A105 Carbon Steel (CS) Socket Weld Union - ANSI Class 3000

ASTM A105 Carbon Steel (CS) Socket Weld Union - ANSI Class 6000

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Socket Weld Pipe Fittings from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc. 

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Butt-Weld Pipe Fittings supplier, exporter, trader, wholesaler, stockiest.

A butt-weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, etc.) in a safe and efficient manner, over short or long distances.

Other types of fittings can be threaded or socket welded.

 

Types of Butt-weld Fittings:

Branch Connections: Lateral, Stub-in Short, Stub-in Long, Saddle, Saddle - Wrap Around, Tee – Straight, Tee – Reducing

Bend, Ends & Reducers: Cap, Reducer – Concentric, Reducer – Eccentric, Elbow - 45 Degree Long Radius, Elbow - 45 Degree Long Radius Long Tangent, Elbow - 45 Degree Three Radius, Return - 180 Degree Short Radius, Return - 180 Degree Long Radius, Elbow - 90 Degree Long Radius Buttweld, Elbow - 90 Degree Long Radius Long Tangent, Elbow - 90 Degree Long Radius Reducing, Elbow - 90 Degree Short Radius, Elbow - 90 Degree Short Radius Long Tangent, Elbow - 90 Degree Three Radius,

Swage – Concentric, Swage – Eccentric

Size Range for Butt-Weld Pipe Fittings: ½” to 4” inch from Ready Stock. Above 4” on make to order basis depending on raw material availability.

Client can procure smaller quantities of Butt-Weld Pipe Fitting products online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Advantages of Butt-Weld Pipe Fittings:

Flanges connect pipes by bolting them together, whereas butt weld fittings connect pipes by welding them together.

Depending on size, butt weld fittings require 10% to 75% less material than a flanged connection, which means lower material cost and lower weight.

Welded construction permits greater freedom in designing a layout; this system uses less space, is more compact, and has greater strength.

Butt weld fittings provide optimum flow characteristics, without pockets or sharp corners, creating less frictional resistance, no pressure loss, less turbulence.

 

Possible products in Butt-Weld Pipe Fittings are mentioned below:

Mild Steel (MS) Butt-weld Pipe Fittings

Carbon Steel (CS) Butt-weld Pipe Fittings

Chrome-Molybdenum Alloy Steel Butt-weld Pipe Fittings

Stainless Steel (SS) Butt-weld Pipe Fittings

Duplex Stainless Steel (DSS) Butt-weld Pipe Fittings

Super Duplex Stainless Steel (SDSS) Butt-weld Pipe Fittings

Nickel Butt-weld Pipe Fittings

Inconel Butt-weld Pipe Fittings

Incoloy Butt-weld Pipe Fittings

Hastelloy Butt-weld Pipe Fittings

Monel Butt-weld Pipe Fittings

Titanium Butt-weld Pipe Fittings

Copper Nickel Butt-weld Pipe Fittings

Butt-weld Fittings

Butt-weld Branch Connections

Butt-weld Lateral

Butt-weld Stub-in Short

Butt-weld Stub-in Long

Butt-weld Saddle

Butt-weld Saddle - Wrap Around

Butt-weld Tee - Straight

Butt-weld Tee - Reducing

Butt-weld Bend, Ends & Reducers

Butt-weld Cap

Butt-weld Reducer - Concentric

Butt-weld Reducer - Eccentric

Butt-weld Elbow - 45 Degree, Long Radius

Butt-weld Elbow - 45 Degree, Long Radius, Long Tangent

Butt-weld Elbow - 45 Degree, Three Radius

Butt-weld Return - 180 Degree, Short Radius

Butt-weld Return - 180 Degree, Long Radius

Butt-weld Elbow - 90 Degree, Long Radius, Buttweld

Butt-weld Elbow - 90 Degree, Long Radius, Long Tangent

Butt-weld Elbow - 90 Degree, Long Radius, Reducing

Butt-weld Elbow - 90 Degree, Short Radius

Butt-weld Elbow - 90 Degree, Short Radius, Long Tangent

Butt-weld Elbow - 90 Degree, Three Radius

Butt-weld Swage - Concentric

Butt-weld Swage - Eccentric

ASTM A350 LF2 Mild Steel (MS) Butt-weld Fittings

ASTM A350 LF2 Mild Steel (MS) Butt-weld Branch Connections

ASTM A350 LF2 Mild Steel (MS) Butt-weld Lateral

ASTM A350 LF2 Mild Steel (MS) Butt-weld Stub-in Short

ASTM A350 LF2 Mild Steel (MS) Butt-weld Stub-in Long

ASTM A350 LF2 Mild Steel (MS) Butt-weld Saddle

ASTM A350 LF2 Mild Steel (MS) Butt-weld Saddle - Wrap Around

ASTM A350 LF2 Mild Steel (MS) Butt-weld Tee - Straight

ASTM A350 LF2 Mild Steel (MS) Butt-weld Tee - Reducing

ASTM A350 LF2 Mild Steel (MS) Butt-weld Bend, Ends & Reducers

ASTM A350 LF2 Mild Steel (MS) Butt-weld Cap

ASTM A350 LF2 Mild Steel (MS) Butt-weld Reducer - Concentric

ASTM A350 LF2 Mild Steel (MS) Butt-weld Reducer - Eccentric

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 45 Degree, Long Radius

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 45 Degree, Long Radius, Long Tangent

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 45 Degree, Three Radius

ASTM A350 LF2 Mild Steel (MS) Butt-weld Return - 180 Degree, Short Radius

ASTM A350 LF2 Mild Steel (MS) Butt-weld Return - 180 Degree, Long Radius

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 90 Degree, Long Radius, Buttweld

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 90 Degree, Long Radius, Long Tangent

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 90 Degree, Long Radius, Reducing

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 90 Degree, Short Radius

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 90 Degree, Short Radius, Long Tangent

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 90 Degree, Three Radius

ASTM A350 LF2 Mild Steel (MS) Butt-weld Swage - Concentric

ASTM A350 LF2 Mild Steel (MS) Butt-weld Swage – Eccentric

ASTM A105 Carbon Steel (CS) Butt-weld Fittings

ASTM A105 Carbon Steel (CS) Butt-weld Branch Connections

ASTM A105 Carbon Steel (CS) Butt-weld Lateral

ASTM A105 Carbon Steel (CS) Butt-weld Stub-in Short

ASTM A105 Carbon Steel (CS) Butt-weld Stub-in Long

ASTM A105 Carbon Steel (CS) Butt-weld Saddle

ASTM A105 Carbon Steel (CS) Butt-weld Saddle - Wrap Around

ASTM A105 Carbon Steel (CS) Butt-weld Tee - Straight

ASTM A105 Carbon Steel (CS) Butt-weld Tee - Reducing

ASTM A105 Carbon Steel (CS) Butt-weld Bend, Ends & Reducers

ASTM A105 Carbon Steel (CS) Butt-weld Cap

ASTM A105 Carbon Steel (CS) Butt-weld Reducer - Concentric

ASTM A105 Carbon Steel (CS) Butt-weld Reducer - Eccentric

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 45 Degree, Long Radius

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 45 Degree, Long Radius, Long Tangent

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 45 Degree, Three Radius

ASTM A105 Carbon Steel (CS) Butt-weld Return - 180 Degree, Short Radius

ASTM A105 Carbon Steel (CS) Butt-weld Return - 180 Degree, Long Radius

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 90 Degree, Long Radius, Buttweld

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 90 Degree, Long Radius, Long Tangent

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 90 Degree, Long Radius, Reducing

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 90 Degree, Short Radius

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 90 Degree, Short Radius, Long Tangent

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 90 Degree, Three Radius

ASTM A105 Carbon Steel (CS) Butt-weld Swage - Concentric

ASTM A105 Carbon Steel (CS) Butt-weld Swage – Eccentric

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Butt-Weld Pipe Fittings from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.