Inconel 718 Round Bars Manufacturer & Supplier

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Inconel 718 Round Bars Manufacturer, Supplier, Exporter, Trader, Wholesaler, Stockiest in India.

Alloy 718 Inconel Round Bars Manufacturer & Supplier is a precipitation hardenable nickel-based alloy designed to display exceptionally high yield, tensile and creep-rupture properties at temperatures up to 1300°F. The sluggish age-hardening response of alloy 718 permits annealing and welding without spontaneous hardening during heating and cooling. This alloy has excellent weldability when compared to the nickel-base super-alloys hardened by aluminium and titanium. This alloy has been used for jet engine and high-speed airframe parts such as wheels, buckets, spacers, and high temperature bolts and fasteners.

Size Specifications for Inconel 718 Round Bars Manufacturer : 6mm upto 250mm

Size Specifications for Inconel 718 Square, Flat, Rectangular Bars Supplier: 2mm upto 55mm in thickness, 500mm to 6000mm length(can be Customized)

Size Specifications for Inconel 718 Hollow Bars Manufacturer: 50mm upto 250mm in diameter as welded hollow bars & 2inch to 10inch diameter as seamless hollow bars

Size Specifications for Inconel 718 Hollow Rings Supplier: 50mm upto 1000mm in diameter as welded hollow rings & 2inch to 30inch diameter as seamless hollow rings

Chemical Composition (Chemistry) of Inconel 718 Round Bars Manufacturer:

Element

Min %

Max %

C

-

0.08

Mn

-

0.35

Si

-

0.35

P

-

0.015

S

-

0.015

Cr

17

21

Ni

50

55

Mo

2.8

3.3

Nb/Cb

4.75

5.5

Ti

0.65

1.15

Al

0.2

0.8

Co

-

1

Ta

-

0.05

B

-

0.006

Cu

-

0.3

Pb

-

0.0005

Bi

-

0.00003

Se

-

0.0003

Fe

bal

Different Designations of Inconel 718 Round Bars Manufacturer:

AMS 5662, AMS 5663, AMS 5832, AMS 5962, ASTM B637, GE B5OTF14/15, GE B14H89, ISO 15156-3, W.NR 2.4668, UNS N07718, AWS 013,

Client can procure smaller quantities of Inconel 718 Round Bars Supplier online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Key features of Inconel 718 Round Bars Manufacturer & Supplier:

Good creep rupture strength at high temperatures
Higher strength than Inconel X-750
Better mechanical properties at lower temperatures than Nimonic 90 & Inconel X-750
Age hardenable
High temperature dynamic applications

Typical Applications of Inconel 718 Round Bars Manufacturer:

Gas Turbines
Rocket Motors
Space Craft
Nuclear Reactors
Pumps

Heat Treatment properties of Inconel 718 Round Bars Supplier:

The following heat treatment should be used to obtain the best combination of tensile properties and stress rupture properties:

1 hr 1750°F to 1800°F (954 to 982°C) air cool + 8hr 1325°F (718°C) cool 100°F /hr to 1150°F (56 °C/hr to 621°C), hold 8 hrs and air cool.

To obtain the best room temperature and cryogenic tensile properties, the following heat treatment should be used:

1 to 2 hr 1950°F (1066°C), air cool + 8 hr 1325°F (718°C) cool 100°F/hr to 1150°F (56°C/hr to 621°C), hold 8 hr and air cool.

Hot Working properties of Inconel 718 Round Bars Manufacturer:

Hot-working is carried out using a 2050°F (1121°C) maximum furnace temperature. Hot-cold working in the range 1700/1850°F (927/1010°C) will improve the strength of the forging if the service temperature is below about 1100°F (593°C). Prolonged soaking at the forging temperature is not desirable. The material should be given uniform reductions to avoid the formation of duplex grain structures.

Machining properties of Inconel 718 Round Bars Supplier:

The alloy can be readily machined in either the annealed or the age-hardened condition. The age-hardened condition gives better chip action on chip breaker tools and produces a better finish. The annealed condition will give a slightly longer tool life.

Welding properties of Inconel 718 Round Bars Manufacturer:

Alloy 718 can be welded in either the annealed or the age condition. Welding in the aged condition will cause the formation of a softened heat-affected zone.

 

Other Possible products in Inconel 718 Round Bars Manufacturer & Supplier are mentioned below:

Inconel 718 Round Bars Manufacturer

Inconel 718 Round Bars Supplier

Inconel 718 Round Bars Exporter

Inconel 718 Round Bars Stockiest

Inconel 718 Round Bars Dealer

Inconel 718 Round Bars Distributor

Inconel 718 Round Bars Importer

Inconel 718 Round Bars Trader

Inconel 718 Round Bars Wholeseller

Inconel 718 Round Bars Manufacturer in Mumbai

Inconel 718 Round Bars Supplier in Mumbai

Inconel 718 Round Bars Exporter in Mumbai

Inconel 718 Round Bars Stockiest in Mumbai

Inconel 718 Round Bars Dealer in Mumbai

Inconel 718 Round Bars Distributor in Mumbai

Inconel 718 Round Bars Importer in Mumbai

Inconel 718 Round Bars Trader in Mumbai

Inconel 718 Round Bars Wholeseller in Mumbai

Inconel 718 Round Bars Manufacturer in India

Inconel 718 Round Bars Supplier in India

Inconel 718 Round Bars Exporter in India

Inconel 718 Round Bars Stockiest in India

Inconel 718 Round Bars Dealer in India

Inconel 718 Round Bars Distributor in India

Inconel 718 Round Bars Importer in India

Inconel 718 Round Bars Trader in India

Inconel 718 Round Bars Wholeseller in India

Inconel 718 Plate

Inconel 718 Circles

Inconel 718 Strips

Inconel 718 Sheets

Inconel 718 Coil

Inconel 718 Foil

Inconel 718 Plate Shapes

Inconel 718 Custom Profiles

Inconel 718 Sleeve

Inconel 718 Tube

Inconel 718 Tubing

Inconel 718 Pipe

Inconel 718 Billets

Inconel 718 Bars

Inconel 718 Round Bars

Inconel 718 Flat Bars

Inconel 718 Square Bars

Inconel 718 Rectangular Bars

Inconel 718 Hollow Bars

Inconel 718 Forged Bars

Inconel 718 Machined Bars

Inconel 718 Rings

Inconel 718 Forged Seamless Rings

Inconel 718 Rolled Seamless Rings

Inconel 718 Fasteners

Inconel 718 Bolts

Inconel 718 Nuts

Inconel 718 Screws

Inconel 718 Washers

Inconel 718 Studs

Inconel 718 Flanges

Inconel 718 Welding Products

Inconel 718 Forgings

Inconel 718 Machined Parts

Inconel 718 Welded Components

Inconel 718 Welding Rods

Inconel 718 Welding Electrodes

Inconel 718 Wire Coil

Inconel 718 Wire Rod Spool

UNS N07718 Plate

UNS N07718 Circles

UNS N07718 Strips

UNS N07718 Sheets

UNS N07718 Coil

UNS N07718 Foil

UNS N07718 Plate Shapes

UNS N07718 Custom Profiles

UNS N07718 Sleeve

UNS N07718 Tube

UNS N07718 Tubing

UNS N07718 Pipe

UNS N07718 Billets

UNS N07718 Bars

UNS N07718 Round Bars

UNS N07718 Flat Bars

UNS N07718 Square Bars

UNS N07718 Rectangular Bars

UNS N07718 Hollow Bars

UNS N07718 Forged Bars

UNS N07718 Machined Bars

UNS N07718 Rings

UNS N07718 Forged Seamless Rings

UNS N07718 Rolled Seamless Rings

UNS N07718 Fasteners

UNS N07718 Bolts

UNS N07718 Nuts

UNS N07718 Screws

UNS N07718 Washers

UNS N07718 Studs

UNS N07718 Flanges

UNS N07718 Welding Products

UNS N07718 Forgings

UNS N07718 Machined Parts

UNS N07718 Welded Components

UNS N07718 Welding Rods

UNS N07718 Welding Electrodes

UNS N07718 Wire Coil

UNS N07718 Wire Rod Spool

DIN 2.4668 Plate

DIN 2.4668 Circles

DIN 2.4668 Strips

DIN 2.4668 Sheets

DIN 2.4668 Coil

DIN 2.4668 Foil

DIN 2.4668 Plate Shapes

DIN 2.4668 Custom Profiles

DIN 2.4668 Sleeve

DIN 2.4668 Tube

DIN 2.4668 Tubing

DIN 2.4668 Pipe

DIN 2.4668 Billets

DIN 2.4668 Bars

DIN 2.4668 Round Bars

DIN 2.4668 Flat Bars

DIN 2.4668 Square Bars

DIN 2.4668 Rectangular Bars

DIN 2.4668 Hollow Bars

DIN 2.4668 Forged Bars

DIN 2.4668 Machined Bars

DIN 2.4668 Rings

DIN 2.4668 Forged Seamless Rings

DIN 2.4668 Rolled Seamless Rings

DIN 2.4668 Fasteners

DIN 2.4668 Bolts

DIN 2.4668 Nuts

DIN 2.4668 Screws

DIN 2.4668 Washers

DIN 2.4668 Studs

DIN 2.4668 Flanges

DIN 2.4668 Welding Products

DIN 2.4668 Forgings

DIN 2.4668 Machined Parts

NiCr19Fe19Nb5Mo3 Plate

NiCr19Fe19Nb5Mo3 Circles

NiCr19Fe19Nb5Mo3 Strips

NiCr19Fe19Nb5Mo3 Sheets

NiCr19Fe19Nb5Mo3 Coil

NiCr19Fe19Nb5Mo3 Foil

NiCr19Fe19Nb5Mo3 Plate Shapes

NiCr19Fe19Nb5Mo3 Custom Profiles

NiCr19Fe19Nb5Mo3 Sleeve

NiCr19Fe19Nb5Mo3 Tube

NiCr19Fe19Nb5Mo3 Tubing

NiCr19Fe19Nb5Mo3 Pipe

NiCr19Fe19Nb5Mo3 Billets

NiCr19Fe19Nb5Mo3 Bars

NiCr19Fe19Nb5Mo3 Round Bars

NiCr19Fe19Nb5Mo3 Flat Bars

NiCr19Fe19Nb5Mo3 Square Bars

NiCr19Fe19Nb5Mo3 Rectangular Bars

NiCr19Fe19Nb5Mo3 Hollow Bars

NiCr19Fe19Nb5Mo3 Forged Bars

NiCr19Fe19Nb5Mo3 Machined Bars

NiCr19Fe19Nb5Mo3 Rings

NiCr19Fe19Nb5Mo3 Forged Seamless Rings

NiCr19Fe19Nb5Mo3 Rolled Seamless Rings

NiCr19Fe19Nb5Mo3 Fasteners

NiCr19Fe19Nb5Mo3 Bolts

NiCr19Fe19Nb5Mo3 Nuts

NiCr19Fe19Nb5Mo3 Screws

NiCr19Fe19Nb5Mo3 Washers

NiCr19Fe19Nb5Mo3 Studs

NiCr19Fe19Nb5Mo3 Flanges

NiCr19Fe19Nb5Mo3 Welding Products

NiCr19Fe19Nb5Mo3 Forgings

NiCr19Fe19Nb5Mo3 Machined Parts

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Inconel 718 Round Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

DIN 1.4547 Round Bars

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading DIN 1.4547 Round Bars supplier, exporter, trader, wholesaler, stockiest.

1.4547 (also called UNS S31254, 254 SMO and SS2378) is a high alloyed austenitic stainless steel with exceptional corrosion resistance. The steel is developed for use in halide-containing environment such as seawater, hydrochloric acid and contaminated sulphuric acid. 1.4547 has a superior resistance to uniform corrosion compared with common stainless steel, especially in acids containing halides.  It has a high content of alloy materials which gives the steel exceptionally good resistance to pitting and crevice corrosion. The steel also have very good resistance to stress corrosion cracking.

Alloys 254 / 254 SMO / 6 Mo is an austenitic stainless steel with a high molybdenum content. Coupled with Nickel and Copper this gives the alloy a good resistance to pitting and crevice corrosion, especially in environments containing halide ions, e.g. chloride, bromide and fluoride solutions.

254 SMO (UNS S31254) may offer a cost effective solution to Nickel and Titanium alloys in these environments.

Size Specifications for Stainless Steel DIN 1.4547 Round Bars: 6mm upto 250mm

Size Specifications for Stainless Steel DIN 1.4547 Square, Flat, Rectangular Bars: 6mm upto 55mm in thickness, 500mm to 6000mm length(can be Customized)

Size Specifications for Stainless Steel DIN 1.4547 Hollow Bars: 50mm upto 250mm in diameter as welded hollow bars & 2inch to 10inch diameter as seamless hollow bars

Size Specifications for Stainless Steel DIN 1.4547 Hollow Rings: 50mm upto 1000mm in diameter as welded hollow rings & 2inch to 30inch diameter as seamless hollow rings

Chemical Composition (Chemistry) of DIN 1.4547 Round Bars:

Element

Content (%)

Iron, Fe

55.69

Chromium, Cr

20

Nickel, Ni

18

Molybdenum, Mo

6.1

Nitrogen, N

0.2

Carbon, C

0.01

Different Designations of DIN 1.4547 Round Bars:

Trade Name: 254SMO or SMO254 or Alloy 254

EU EN: X1CrNiMoCuN20-18-7

UNS S31254

DIN, WNr:  1.4547

Sweden SS: 2378

AFNOR Z1 CNDU 20.18.06AZ

BS X1CrNiMoCuN20-18-7

ASTM A182 F44

Client can procure smaller quantities of DIN 1.4547 Round Bars online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Good formability and weldability of DIN 1.4547:
1.4547 has a good weldability and the methods used for welding conventional austenitic steels are used. It is somewhat more sensitive to hot cracking and shall be welded with low heat input.

Filler metal of type Welding P12 or P16 are recommended. These filler metals will give a weld with a resistance to pitting corrosion. The steel can be both cold and hot formed. Due to a higher strength and alloy materials the steel is difficult to machine.

Applications of DIN 1.4547:

Chemical Process Industry: Urea Production, Organic and Fatty Acids, High halide concentrations

Marine Industry and Shipbuilding: Piping, Pumps, Valves, Heat exchangers

Oil and Gas Industry: Heat exchangers, Piping, Valves, Pumps

Pulp and Paper Industry: Bleach plant, vats, drums, press rolls, piping

Power Industry: Flue gas scrubbers

Desalination plant: Piping, Condensers

 

Other Possible products in Stainless Steel DIN 1.4547 are mentioned below:

DIN 1.4547 Plate

DIN 1.4547 Circles

DIN 1.4547 Strips

DIN 1.4547 Sheets

DIN 1.4547 Patti

DIN 1.4547 Patta

DIN 1.4547 Plate Shapes

DIN 1.4547 Custom Profiles

DIN 1.4547 Shims

DIN 1.4547 Fittings

DIN 1.4547 Elbow

DIN 1.4547 Tee

DIN 1.4547 Eccentric & Concentric Reducer

DIN 1.4547 Nipple

DIN 1.4547 Sleeve

DIN 1.4547 Union

DIN 1.4547 Tube

DIN 1.4547 Tubing

DIN 1.4547 Pipe

DIN 1.4547 Billets

DIN 1.4547 Bar

DIN 1.4547 Round Bars

DIN 1.4547 Flat Bars

DIN 1.4547 Square Bars

DIN 1.4547 Round Corner Square Bars

DIN 1.4547 Hexagonal Bars

DIN 1.4547 Rectangular Bars

DIN 1.4547 Forged Bars

DIN 1.4547 Rolled Bars

DIN 1.4547 Black Bars

DIN 1.4547 Bright Bars

DIN 1.4547 Peeled Bars

DIN 1.4547 Machined Bars

DIN 1.4547 Hollow Bars

DIN 1.4547 Blocks

DIN 1.4547 Slabs

DIN 1.4547 Rings

DIN 1.4547 Forged Seamless Rings

DIN 1.4547 Rolled Seamless Rings

DIN 1.4547 Fasteners

DIN 1.4547 Bolts

DIN 1.4547 Nuts

DIN 1.4547 Screws

DIN 1.4547 Washers

DIN 1.4547 Studs

DIN 1.4547 Flanges

DIN 1.4547 Long Welding Neck Flanges

DIN 1.4547 Blind Flanges

DIN 1.4547 Slip-On Flanges

DIN 1.4547 Lap Joint Flanges

DIN 1.4547 Threaded Flanges

DIN 1.4547 Socket Welding Flanges

DIN 1.4547 Welding Products

DIN 1.4547 Forgings

DIN 1.4547 Machined Parts

DIN 1.4547 Welded Components

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of DIN 1.4547 Round Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

DIN 1.4501 Super Duplex Steel Round Bars

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading DIN 1.4501 Super Duplex Steel Round Bars supplier, exporter, trader, wholesaler, stockiest.

Super Duplex Alloy UNS S32760 (F55 / 1.4501) has excellent corrosion resistance to a wide variety of media, with outstanding resistance to pitting and crevice corrosion in seawater and other chloride containing environments, with Critical Pitting Temperature exceeding 50°C.

Providing higher strength than both austenitic and 22% Cr Super Duplex Stainless Steels UNS S32760 (F55) is suited to a variety of applications in industries such as Chemical Processing, Oil & Gas, and Marine environments.

Size Specifications for DIN 1.4501 Super Duplex Steel Round Bars: 6mm upto 560mm

Size Specifications for DIN 1.4501 Super Duplex Steel Square, Flat, Rectangular Bars: 6mm upto 100mm in thickness, 3000mm to 6000mm length(can be Customized)

Size Specifications for DIN 1.4501 Super Duplex Steel Hollow Bars: 50mm upto 560mm in diameter as welded hollow bars & 2inch to 20inch diameter as seamless hollow bars

Size Specifications for DIN 1.4501 Super Duplex Steel Hollow Rings: 50mm upto 560mm in diameter as welded hollow rings & 2inch to 20inch diameter as seamless hollow rings

Super Duplex 1.4501 - UNS S32760 - F55 Forgings:

Forgings according to drawings, bars, discs and rings on request.

Free-form forged parts acc. to drawing, forged bars, discs and rings on request

Super Duplex 1.4501 - UNS S32760 - F55 Hollow bars:

From round bars turned and drilled on request.

Super Duplex 1.4501 - UNS S32760 - F55 hexagon bars bright drawn tolerance h11 DIN EN 10278 ( formerly DIN 176 ) long 3 mtr:

Sizes: hex 17 mm - hex 50 mm

Super Duplex 1.4501 - UNS S32760 - F55 seamless pipe ASTM/ASME A/SA 789/790:

Sizes on request.

Super Duplex 1.4501 – UNS S32760 – F55 pipe fittings / elbows / flanges:

Sizes on request.

Super Duplex 1.4501 - UNS S32760 - F55 Sheets/Plates hotrolled Finish 1 :

Thickness:  4 mm - 50 mm

Width: 1000 / 1250 / 1500 / 2000 / 2500 mm

Length: 2000 / 2500 / 3000 / 6000

Super Duplex 1.4501 - UNS S32760 - F55 sheets / plates plasma cutting / water-jet cutting / laser-cutting / sawn cuttings

Chemical Composition (Chemistry) of DIN 1.4501 Super Duplex Steel Round Bars:

Elements

C

Cr

Cu

Mo

Mn

N

Ni

P

S

Si

W

Minimum

-

24

0.5

3

-

0.2

6

-

-

-

0.5

Maximum

0.03

26

1

4

1

0.3

8

0.03

0.01

1

1

Different Designations of DIN 1.4501 Super Duplex Steel:

Common Name: Zeron 100

EN/DIN: 1.4501, X2CrNiMoCuWN25.7.4

AFNOR: Z3CND25.06Az

UNS: S32760

AISI: F55 (A182 / A276 / A479)

GOST: 12Kh13

NORSOK: M630 MDS D57 BAR, M630 MDS D54 FORGINGS, M630 MDS D55 PLATE, M630 MDS D56 CASTINGS

Client can procure smaller quantities of DIN 1.4501 Super Duplex Steel Round Bars online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Applications of DIN 1.4501 Super Duplex Steel:

Chemical Process Industry: Nitric Acid Processes, Polypropylene Production, PVC Production, Dioxide, Caustic Evaporators, Equipment, Handling Organic and Fatty Acids

Marine Industry and Shipbuilding: Propellers and Shafts, Rudders, Shaft Seals, Pumps, Bolts and Fasteners, Valves, Instrumentation, Oil and Chemical Tankers

Oil and Gas Industry: Pumps, Valves, Pipe, Vessels, Wellhead Equipment, Subsea Equipment

Pollution Control: Fans and pumps, Wet Scrubbers, Incinerators

Pulp and Paper Industry: Black liquor heater tubes, Digester Blow Valves, Rotary Feed Valves, I.D.Fans, Brownstock Washers, Precipitators, Bleaching Components

Food Industry: Sugar Cane Centrifuges, Corn and Vegetable processing plant

Agrochemicals: Fertiliser Production (Wet phosphoric acid)

Civil Engineering: Sewage Treatment

Features of DIN 1.4501 Super Duplex Steel:

High strength compared to austenitic and 22% chrome duplex stainless steels

Excellent corrosion resistance in a wide variety of corrosive chemicals including seawater and industrial acids

Excellent ductility and impact strength at both ambient and sub-zero temperatures

High resistance to abrasion, erosion and cavitation erosion Excellent resistance to stress corrosion cracking

Specified for pressure vessel applications

 

Other Possible products in DIN 1.4501 Super Duplex Steel are mentioned below:

DIN 1.4501 Super Duplex Steel Plate

DIN 1.4501 Super Duplex Steel Circles

DIN 1.4501 Super Duplex Steel Strips

DIN 1.4501 Super Duplex Steel Sheets

DIN 1.4501 Super Duplex Steel Coil

DIN 1.4501 Super Duplex Steel Foil

DIN 1.4501 Super Duplex Steel Patti

DIN 1.4501 Super Duplex Steel Patta

DIN 1.4501 Super Duplex Steel Plate Shapes

DIN 1.4501 Super Duplex Steel Custom Profiles

DIN 1.4501 Super Duplex Steel Shims

DIN 1.4501 Super Duplex Steel Pre-Cut Shims

DIN 1.4501 Super Duplex Steel Double or Multiple U Cut Shims

DIN 1.4501 Super Duplex Steel Circular Washer Shims

DIN 1.4501 Super Duplex Steel Softfoot Shims

DIN 1.4501 Super Duplex Steel Coupling Shims

DIN 1.4501 Super Duplex Steel Fittings

DIN 1.4501 Super Duplex Steel Elbow

DIN 1.4501 Super Duplex Steel Tee

DIN 1.4501 Super Duplex Steel Eccentric & Concentric Reducer

DIN 1.4501 Super Duplex Steel Nipple

DIN 1.4501 Super Duplex Steel Sleeve

DIN 1.4501 Super Duplex Steel Union

DIN 1.4501 Super Duplex Steel Tube

DIN 1.4501 Super Duplex Steel Tubing

DIN 1.4501 Super Duplex Steel Pipe

DIN 1.4501 Super Duplex Steel Billets

DIN 1.4501 Super Duplex Steel Bar

DIN 1.4501 Super Duplex Steel Round Bars

DIN 1.4501 Super Duplex Steel Flat Bars

DIN 1.4501 Super Duplex Steel Square Bars

DIN 1.4501 Super Duplex Steel Round Corner Square Bars

DIN 1.4501 Super Duplex Steel Hexagonal Bars

DIN 1.4501 Super Duplex Steel Rectangular Bars

DIN 1.4501 Super Duplex Steel Forged Bars

DIN 1.4501 Super Duplex Steel Rolled Bars

DIN 1.4501 Super Duplex Steel Black Bars

DIN 1.4501 Super Duplex Steel Bright Bars

DIN 1.4501 Super Duplex Steel Peeled Bars

DIN 1.4501 Super Duplex Steel Machined Bars

DIN 1.4501 Super Duplex Steel Hollow Bars

DIN 1.4501 Super Duplex Steel Rings

DIN 1.4501 Super Duplex Steel Forged Seamless Rings

DIN 1.4501 Super Duplex Steel Rolled Seamless Rings

DIN 1.4501 Super Duplex Steel Fasteners

DIN 1.4501 Super Duplex Steel Bolts

DIN 1.4501 Super Duplex Steel Nuts

DIN 1.4501 Super Duplex Steel Screws

DIN 1.4501 Super Duplex Steel Washers

DIN 1.4501 Super Duplex Steel Studs

DIN 1.4501 Super Duplex Steel Flanges

DIN 1.4501 Super Duplex Steel Long Welding Neck Flanges

DIN 1.4501 Super Duplex Steel Blind Flanges

DIN 1.4501 Super Duplex Steel Slip-On Flanges

DIN 1.4501 Super Duplex Steel Lap Joint Flanges

DIN 1.4501 Super Duplex Steel Threaded Flanges

DIN 1.4501 Super Duplex Steel Socket Welding Flanges

DIN 1.4501 Super Duplex Steel Welding Products

DIN 1.4501 Super Duplex Steel Forgings

DIN 1.4501 Super Duplex Steel Machined Parts

DIN 1.4501 Super Duplex Steel Welded Components

DIN 1.4501 Super Duplex Steel Welding Rods

DIN 1.4501 Super Duplex Steel Welding Electrodes

DIN 1.4501 Super Duplex Steel Wire Coil

DIN 1.4501 Super Duplex Steel Wire Rod Spool

UNS S32760 Super Duplex Steel Plate

UNS S32760 Super Duplex Steel Circles

UNS S32760 Super Duplex Steel Strips

UNS S32760 Super Duplex Steel Sheets

UNS S32760 Super Duplex Steel Coil

UNS S32760 Super Duplex Steel Foil

UNS S32760 Super Duplex Steel Patti

UNS S32760 Super Duplex Steel Patta

UNS S32760 Super Duplex Steel Plate Shapes

UNS S32760 Super Duplex Steel Custom Profiles

UNS S32760 Super Duplex Steel Shims

UNS S32760 Super Duplex Steel Pre-Cut Shims

UNS S32760 Super Duplex Steel Double or Multiple U Cut Shims

UNS S32760 Super Duplex Steel Circular Washer Shims

UNS S32760 Super Duplex Steel Softfoot Shims

UNS S32760 Super Duplex Steel Coupling Shims

UNS S32760 Super Duplex Steel Fittings

UNS S32760 Super Duplex Steel Elbow

UNS S32760 Super Duplex Steel Tee

UNS S32760 Super Duplex Steel Eccentric & Concentric Reducer

UNS S32760 Super Duplex Steel Nipple

UNS S32760 Super Duplex Steel Sleeve

UNS S32760 Super Duplex Steel Union

UNS S32760 Super Duplex Steel Tube

UNS S32760 Super Duplex Steel Tubing

UNS S32760 Super Duplex Steel Pipe

UNS S32760 Super Duplex Steel Billets

UNS S32760 Super Duplex Steel Bar

UNS S32760 Super Duplex Steel Round Bars

UNS S32760 Super Duplex Steel Flat Bars

UNS S32760 Super Duplex Steel Square Bars

UNS S32760 Super Duplex Steel Round Corner Square Bars

UNS S32760 Super Duplex Steel Hexagonal Bars

UNS S32760 Super Duplex Steel Rectangular Bars

UNS S32760 Super Duplex Steel Forged Bars

UNS S32760 Super Duplex Steel Rolled Bars

UNS S32760 Super Duplex Steel Black Bars

UNS S32760 Super Duplex Steel Bright Bars

UNS S32760 Super Duplex Steel Peeled Bars

UNS S32760 Super Duplex Steel Machined Bars

UNS S32760 Super Duplex Steel Hollow Bars

UNS S32760 Super Duplex Steel Rings

UNS S32760 Super Duplex Steel Forged Seamless Rings

UNS S32760 Super Duplex Steel Rolled Seamless Rings

UNS S32760 Super Duplex Steel Fasteners

UNS S32760 Super Duplex Steel Bolts

UNS S32760 Super Duplex Steel Nuts

UNS S32760 Super Duplex Steel Screws

UNS S32760 Super Duplex Steel Washers

UNS S32760 Super Duplex Steel Studs

UNS S32760 Super Duplex Steel Flanges

UNS S32760 Super Duplex Steel Long Welding Neck Flanges

UNS S32760 Super Duplex Steel Blind Flanges

UNS S32760 Super Duplex Steel Slip-On Flanges

UNS S32760 Super Duplex Steel Lap Joint Flanges

UNS S32760 Super Duplex Steel Threaded Flanges

UNS S32760 Super Duplex Steel Socket Welding Flanges

UNS S32760 Super Duplex Steel Welding Products

UNS S32760 Super Duplex Steel Forgings

UNS S32760 Super Duplex Steel Machined Parts

UNS S32760 Super Duplex Steel Welded Components

UNS S32760 Super Duplex Steel Welding Rods

UNS S32760 Super Duplex Steel Welding Electrodes

UNS S32760 Super Duplex Steel Wire Coil

UNS S32760 Super Duplex Steel Wire Rod Spool

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of DIN 1.4501 Super Duplex Steel Round Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

DIN 1.4410 Super Duplex Steel Round Bars

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading DIN 1.4410 Super Duplex Steel Round Bars supplier, exporter, trader, wholesaler, stockiest.

Duplex 1.4410 is a super duplex stainless steel designed for applications which demand exceptional strength and corrosion resistance. Alloy 1.4410 has 25% chromium, 4% molybdenum, and 7% nickel. This high molybdenum, chromium and nitrogen content results in excellent resistance to chloride pitting and crevice corrosion attack and the duplex structure provides 1.4410 with exceptional resistance to chloride stress corrosion cracking.

Usage of Super Duplex 1.4410 should be limited to applications below 600° F (316° C). Extended elevated temperature exposure can reduce both the toughness and corrosion resistance of alloy 2507.

Super Duplex 1.4410 possesses excellent mechanical properties. Often a light gauge of 1.4410 material can be used to achieve the same design strength of a thicker nickel alloy. The resulting savings in weight can dramatically reduce the overall cost of fabrication.

Size Specifications for DIN 1.4410 Super Duplex Steel Round Bars: 6mm upto 350mm

Size Specifications for DIN 1.4410 Super Duplex Steel Square, Flat, Rectangular Bars: 6mm upto 100mm in thickness, 3000mm to 6000mm length(can be Customized)

 Size Specifications for DIN 1.4410 Super Duplex Steel Hollow Bars: 12.7mm upto 350mm in diameter as welded hollow bars & 2inch to 12inch diameter as seamless hollow bars

Size Specifications for DIN 1.4410 Super Duplex Steel Hollow Rings: 12.7mm upto 350mm in diameter as welded hollow rings & 2inch to 12inch diameter as seamless hollow rings

Chemical Composition (Chemistry) of DIN 1.4410 Super Duplex Steel Round Bars:

Chromium, Cr: 24 – 26

Nickel, Ni: 6 – 8

Molybdenum, Mo: 3 – 5

Manganese, Mn: 1.20 max

Silicon, Si: 0.80 max

Copper, Cu: 0.50 max

Nitrogen, N: 0.24 – 0.32

Phosphorous, P: 0.035 max

Carbon, C: 0.030 max

Sulfur, S: 0.020 max

Iron, Fe: Balance

Different Designations of DIN 1.4410 Super Duplex Steel:

EN/DIN: 1.4410, X2CrNiMoN25-7-4

AFNOR: Z3CND25-06Az

UNS: S32750

AISI: F53 (A182 / A276 / A479)

Sweden, SS: 2328

Client can procure smaller quantities of DIN 1.4410 Super Duplex Steel Round Bars online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Corrosion Resistance properties of DIN 1.4410 Super Duplex:

1.4410 Super Duplex is highly resistant to uniform corrosion by organic acids such as formic and acetic acid. It is also highly resistant to inorganic acids, especially if they contain chlorides.  Alloy 1.4410 is highly resistant to carbide-related inter-granular corrosion.  Due to the ferritic portion of the duplex structure of the alloy it is very resistant to stress corrosion cracking in warm chloride containing environments. Through additions of chromium, molybdenum and nitrogen localized corrosion such as pitting and crevice attack are improved.  Alloy 2507 has excellent localized pitting resistance.

 

What are the characteristics of DIN 1.4410 Super Duplex?

High resistance to chloride stress corrosion cracking

High Strength

Superior resistance to chloride pitting and crevice corrosion

Good general corrosion resistance

Suggested for applications up to 600° F

Low rate of thermal expansion

Combination of properties given by austenitic and ferritic structure

Good weldability and workability

 

In what applications is Super Duplex 1.4410 used?

Desalination Equipment

Chemical process pressure vessels, piping and heat exchangers

Marine Applications

Flue Gas Scrubbing Equipment

Pulp & Paper Mill Equipment

Offshore Oil production/technology

Oil and gas industry equipment

 

Other Possible products in DIN 1.4410 Super Duplex Steel are mentioned below:

DIN 1.4410 Super Duplex Steel Plate

DIN 1.4410 Super Duplex Steel Circles

DIN 1.4410 Super Duplex Steel Strips

DIN 1.4410 Super Duplex Steel Sheets

DIN 1.4410 Super Duplex Steel Coil

DIN 1.4410 Super Duplex Steel Foil

DIN 1.4410 Super Duplex Steel Patti

DIN 1.4410 Super Duplex Steel Patta

DIN 1.4410 Super Duplex Steel Plate Shapes

DIN 1.4410 Super Duplex Steel Custom Profiles

DIN 1.4410 Super Duplex Steel Shims

DIN 1.4410 Super Duplex Steel Pre-Cut Shims

DIN 1.4410 Super Duplex Steel Double or Multiple U Cut Shims

DIN 1.4410 Super Duplex Steel Circular Washer Shims

DIN 1.4410 Super Duplex Steel Softfoot Shims

DIN 1.4410 Super Duplex Steel Coupling Shims

DIN 1.4410 Super Duplex Steel Fittings

DIN 1.4410 Super Duplex Steel Elbow

DIN 1.4410 Super Duplex Steel Tee

DIN 1.4410 Super Duplex Steel Eccentric & Concentric Reducer

DIN 1.4410 Super Duplex Steel Nipple

DIN 1.4410 Super Duplex Steel Sleeve

DIN 1.4410 Super Duplex Steel Union

DIN 1.4410 Super Duplex Steel Tube

DIN 1.4410 Super Duplex Steel Tubing

DIN 1.4410 Super Duplex Steel Pipe

DIN 1.4410 Super Duplex Steel Billets

DIN 1.4410 Super Duplex Steel Bar

DIN 1.4410 Super Duplex Steel Round Bars

DIN 1.4410 Super Duplex Steel Flat Bars

DIN 1.4410 Super Duplex Steel Square Bars

DIN 1.4410 Super Duplex Steel Round Corner Square Bars

DIN 1.4410 Super Duplex Steel Hexagonal Bars

DIN 1.4410 Super Duplex Steel Rectangular Bars

DIN 1.4410 Super Duplex Steel Forged Bars

DIN 1.4410 Super Duplex Steel Rolled Bars

DIN 1.4410 Super Duplex Steel Black Bars

DIN 1.4410 Super Duplex Steel Bright Bars

DIN 1.4410 Super Duplex Steel Peeled Bars

DIN 1.4410 Super Duplex Steel Machined Bars

DIN 1.4410 Super Duplex Steel Hollow Bars

DIN 1.4410 Super Duplex Steel Rings

DIN 1.4410 Super Duplex Steel Forged Seamless Rings

DIN 1.4410 Super Duplex Steel Rolled Seamless Rings

DIN 1.4410 Super Duplex Steel Fasteners

DIN 1.4410 Super Duplex Steel Bolts

DIN 1.4410 Super Duplex Steel Nuts

DIN 1.4410 Super Duplex Steel Screws

DIN 1.4410 Super Duplex Steel Washers

DIN 1.4410 Super Duplex Steel Studs

DIN 1.4410 Super Duplex Steel Flanges

DIN 1.4410 Super Duplex Steel Long Welding Neck Flanges

DIN 1.4410 Super Duplex Steel Blind Flanges

DIN 1.4410 Super Duplex Steel Slip-On Flanges

DIN 1.4410 Super Duplex Steel Lap Joint Flanges

DIN 1.4410 Super Duplex Steel Threaded Flanges

DIN 1.4410 Super Duplex Steel Socket Welding Flanges

DIN 1.4410 Super Duplex Steel Welding Products

DIN 1.4410 Super Duplex Steel Forgings

DIN 1.4410 Super Duplex Steel Machined Parts

DIN 1.4410 Super Duplex Steel Welded Components

DIN 1.4410 Super Duplex Steel Welding Rods

DIN 1.4410 Super Duplex Steel Welding Electrodes

DIN 1.4410 Super Duplex Steel Wire Coil

DIN 1.4410 Super Duplex Steel Wire Rod Spool

UNS S32750 Super Duplex Steel Plate

UNS S32750 Super Duplex Steel Circles

UNS S32750 Super Duplex Steel Strips

UNS S32750 Super Duplex Steel Sheets

UNS S32750 Super Duplex Steel Coil

UNS S32750 Super Duplex Steel Foil

UNS S32750 Super Duplex Steel Patti

UNS S32750 Super Duplex Steel Patta

UNS S32750 Super Duplex Steel Plate Shapes

UNS S32750 Super Duplex Steel Custom Profiles

UNS S32750 Super Duplex Steel Shims

UNS S32750 Super Duplex Steel Pre-Cut Shims

UNS S32750 Super Duplex Steel Double or Multiple U Cut Shims

UNS S32750 Super Duplex Steel Circular Washer Shims

UNS S32750 Super Duplex Steel Softfoot Shims

UNS S32750 Super Duplex Steel Coupling Shims

UNS S32750 Super Duplex Steel Fittings

UNS S32750 Super Duplex Steel Elbow

UNS S32750 Super Duplex Steel Tee

UNS S32750 Super Duplex Steel Eccentric & Concentric Reducer

UNS S32750 Super Duplex Steel Nipple

UNS S32750 Super Duplex Steel Sleeve

UNS S32750 Super Duplex Steel Union

UNS S32750 Super Duplex Steel Tube

UNS S32750 Super Duplex Steel Tubing

UNS S32750 Super Duplex Steel Pipe

UNS S32750 Super Duplex Steel Billets

UNS S32750 Super Duplex Steel Bar

UNS S32750 Super Duplex Steel Round Bars

UNS S32750 Super Duplex Steel Flat Bars

UNS S32750 Super Duplex Steel Square Bars

UNS S32750 Super Duplex Steel Round Corner Square Bars

UNS S32750 Super Duplex Steel Hexagonal Bars

UNS S32750 Super Duplex Steel Rectangular Bars

UNS S32750 Super Duplex Steel Forged Bars

UNS S32750 Super Duplex Steel Rolled Bars

UNS S32750 Super Duplex Steel Black Bars

UNS S32750 Super Duplex Steel Bright Bars

UNS S32750 Super Duplex Steel Peeled Bars

UNS S32750 Super Duplex Steel Machined Bars

UNS S32750 Super Duplex Steel Hollow Bars

UNS S32750 Super Duplex Steel Rings

UNS S32750 Super Duplex Steel Forged Seamless Rings

UNS S32750 Super Duplex Steel Rolled Seamless Rings

UNS S32750 Super Duplex Steel Fasteners

UNS S32750 Super Duplex Steel Bolts

UNS S32750 Super Duplex Steel Nuts

UNS S32750 Super Duplex Steel Screws

UNS S32750 Super Duplex Steel Washers

UNS S32750 Super Duplex Steel Studs

UNS S32750 Super Duplex Steel Flanges

UNS S32750 Super Duplex Steel Long Welding Neck Flanges

UNS S32750 Super Duplex Steel Blind Flanges

UNS S32750 Super Duplex Steel Slip-On Flanges

UNS S32750 Super Duplex Steel Lap Joint Flanges

UNS S32750 Super Duplex Steel Threaded Flanges

UNS S32750 Super Duplex Steel Socket Welding Flanges

UNS S32750 Super Duplex Steel Welding Products

UNS S32750 Super Duplex Steel Forgings

UNS S32750 Super Duplex Steel Machined Parts

UNS S32750 Super Duplex Steel Welded Components

UNS S32750 Super Duplex Steel Welding Rods

UNS S32750 Super Duplex Steel Welding Electrodes

UNS S32750 Super Duplex Steel Wire Coil

UNS S32750 Super Duplex Steel Wire Rod Spool

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of DIN 1.4410 Super Duplex Steel Round Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

DIN 17CrNiMo6-7 Round Bars Supplier, Manufacturer

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading alloy steel DIN 17CrNiMo6-7 Round Bars & Forged Blocks manufacturer, suppliers, exporter, trader, wholesaler, stockiest.

17CrNiMo6 alloy steel is a grade at DIN 17120-(86) standard (structural steel grades and mechanical property for forgings). 17CrNiMo6 can be produced into hot rolled round bars and square bars, cold-drawing bars, forged bars. We can supply 17CrNiMo6 all of shapes.

According to the market needs, Jayant Impex Pvt Ltd can supply the overseas markets for 17CrNiMo6 hot rolled round bars OD 6mm -80 mm and 17CrNiMo6 forged round bars OD 80 mm - 1200 mm, also 17CrNiMo6 forged square bars OD 100- 1200 mm. The OD tolerance is about 0-3mm and length tolerance is about 0-20 mm.

17CrNiMo6 round bars are usually produced under the followed procedures: EAF arc furnace + LF purify affinage + VDF + ingot steel (bottom gating /argon) + forged + annealing + black polishing (turnery) + Sep 1921-C/c, D/d, E/e UT test + smooth edges with sawing .

Different Designations of 17CrNiMo6 Alloy Steel Bars:

EU EN: 18CrNiMo7-6 (1.6587)

Germany DIN,WNr: 17CrNiMo6, 17CrNiMo7

France AFNOR: 18NCD6

England BS: 820A16

Italy UNI: 18NiCrMo7

China GB: 17Cr2Ni2Mo

Finland SFS: 511

Inter ISO: 18CrNiMo7

17crnimo6 Alloy Steel Round Bar Chemical Composition:

Element

C

Mn

Si

S

P

Cr

Ni

17crnimo6

.14 – .19

.40 – .60

.15 – .40

.035 MAX

.035 MAX

1.50- 1.80

1.40 – 1.70

 

DIN 17120-(86) 17CrNiMo6 bars mechanical properties:

Grade

Delivery State

Sectional

Dimension

(mm)

T.S.

N/mm2

Min

Y.S.

N/mm2

Min

A,%

Min

Z,%

Min

Forging ratio

Grain Size

(level)

Nonmetal ratio

DIN 17120 17CrNiMo6

Carburization + quenching + tempering

≤ 30

1080

790

8

35

≥ 4:1

≥ 6

≤ 2.0

30-63

980

690

8

35

Client can procure smaller quantities of DIN 17CrNiMo6-7 Round Bars & Forged Blocks online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Finished goods condition for 17CrNiMo6 Bars: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering. Any other conditions based on the customer's requirement.

Surface conditions for 17CrNiMo6 Bars: flaking /turning /grinding /polishing /buffing /acid /rough machining /fine machining. Any other processing technique based on the customer's special requirements.

Ultrasonic inspection for 17CrNiMo6 Bars: 100% ultrasonic inspection based on the customer's requirement. Excellent service for all kinds of industries with advantages of technologies, equipments and affordable price.

Heat treatment conditions for 17CrNiMo6 Alloy Steel Bars:

+A: Soft annealed

+AC: Annealed to achieve spheroidization of the carbides

+AR: As rolled

+AT: Solution annealed

+C: Cold drawn / hard

+CR: Cold rolled

+FP: Treated to ferrite-pearlite structure and hardness range

+I: Isothermal annealing

+LC: Cold drawn / soft

+M: Thermo mechanical rolling

+N: Normalized

+NT: Normalized and tempered

+P: Precipitation hardened

+PE: Peeled

+QA: Air quenched and tempered

+QL: Liquid quenched and tempered

+QT: Quenched and tempered

+S: Treated to improve shearability

+SH: As rolled and turned

+SR: Cold drawn and stress relieved

+T: Tempered

+TH: Treated to hardness range

+WW: Warm worked

+U: Untreated

Applications
Severely stressed components for mechanical engineering and automobile industry. 

 

Other Possible products in Alloy Steel 17CrNiMo6 are mentioned below:

Alloy Steel 17CrNiMo6 Plates

Alloy Steel 17CrNiMo6 Circles

Alloy Steel 17CrNiMo6 Plate Shapes

Alloy Steel 17CrNiMo6 Custom Profiles

Alloy Steel 17CrNiMo6 Patta

Alloy Steel 17CrNiMo6 Patti

Alloy Steel 17CrNiMo6 Rods

Alloy Steel 17CrNiMo6 Blooms

Alloy Steel 17CrNiMo6 Billets

Alloy Steel 17CrNiMo6 Bar

Alloy Steel 17CrNiMo6 Round Bars

Alloy Steel 17CrNiMo6 Flat Bars

Alloy Steel 17CrNiMo6 Round Corner Square Bars

Alloy Steel 17CrNiMo6 RCS Bars

Alloy Steel 17CrNiMo6 Straight Corner Square Bars

Alloy Steel 17CrNiMo6 SCS Bars

Alloy Steel 17CrNiMo6 Square Bars

Alloy Steel 17CrNiMo6 Rectangular Bars

Alloy Steel 17CrNiMo6 Hexagonal Bars

Alloy Steel 17CrNiMo6 Forged Bars

Alloy Steel 17CrNiMo6 Rolled Bars

Alloy Steel 17CrNiMo6 Black Bars

Alloy Steel 17CrNiMo6 Bright Bars

Alloy Steel 17CrNiMo6 Proof Machined Bars

Alloy Steel 17CrNiMo6 Blocks

Alloy Steel 17CrNiMo6 Slabs

Alloy Steel 17CrNiMo6 Forgings

Alloy Steel 17CrNiMo6 Rings

Alloy Steel 17CrNiMo6 Forged Seamless Rings

Alloy Steel 17CrNiMo6 Rolled Seamless Rings

Alloy Steel 17CrNiMo6 Machined Parts

Alloy Steel 18CrNiMo7-6 Plates

Alloy Steel 18CrNiMo7-6 Circles

Alloy Steel 18CrNiMo7-6 Plate Shapes

Alloy Steel 18CrNiMo7-6 Custom Profiles

Alloy Steel 18CrNiMo7-6 Patta

Alloy Steel 18CrNiMo7-6 Patti

Alloy Steel 18CrNiMo7-6 Rods

Alloy Steel 18CrNiMo7-6 Blooms

Alloy Steel 18CrNiMo7-6 Billets

Alloy Steel 18CrNiMo7-6 Bar

Alloy Steel 18CrNiMo7-6 Round Bars

Alloy Steel 18CrNiMo7-6 Flat Bars

Alloy Steel 18CrNiMo7-6 Square Bars

Alloy Steel 18CrNiMo7-6 Rectangular Bars

Alloy Steel 18CrNiMo7-6 Hexagonal Bars

Alloy Steel 18CrNiMo7-6 Forged Bars

Alloy Steel 18CrNiMo7-6 Rolled Bars

Alloy Steel 18CrNiMo7-6 Black Bars

Alloy Steel 18CrNiMo7-6 Bright Bars

Alloy Steel 18CrNiMo7-6 Proof Machined Bars

Alloy Steel 18CrNiMo7-6 Blocks

Alloy Steel 18CrNiMo7-6 Slabs

Alloy Steel 18CrNiMo7-6 Forgings

Alloy Steel 18CrNiMo7-6 Rings

Alloy Steel 18CrNiMo7-6 Forged Seamless Rings

Alloy Steel 18CrNiMo7-6 Rolled Seamless Rings

Alloy Steel 18CrNiMo7-6 Machined Parts

Alloy Steel 1.6587 Plates

Alloy Steel 1.6587 Circles

Alloy Steel 1.6587 Plate Shapes

Alloy Steel 1.6587 Custom Profiles

Alloy Steel 1.6587 Patta

Alloy Steel 1.6587 Patti

Alloy Steel 1.6587 Rods

Alloy Steel 1.6587 Blooms

Alloy Steel 1.6587 Billets

Alloy Steel 1.6587 Bar

Alloy Steel 1.6587 Round Bars

Alloy Steel 1.6587 Flat Bars

Alloy Steel 1.6587 Square Bars

Alloy Steel 1.6587 Rectangular Bars

Alloy Steel 1.6587 Hexagonal Bars

Alloy Steel 1.6587 Forged Bars

Alloy Steel 1.6587 Rolled Bars

Alloy Steel 1.6587 Black Bars

Alloy Steel 1.6587 Bright Bars

Alloy Steel 1.6587 Proof Machined Bars

Alloy Steel 1.6587 Forgings

Alloy Steel 1.6587 Rings

Alloy Steel 1.6587 Forged Seamless Rings

Alloy Steel 1.6587 Rolled Seamless Rings

Alloy Steel 1.6587 Machined Parts

Alloy Steel 17CrNiMo7 Plates

Alloy Steel 17CrNiMo7 Circles

Alloy Steel 17CrNiMo7 Plate Shapes

Alloy Steel 17CrNiMo7 Custom Profiles

Alloy Steel 17CrNiMo7 Patta

Alloy Steel 17CrNiMo7 Patti

Alloy Steel 17CrNiMo7 Rods

Alloy Steel 17CrNiMo7 Blooms

Alloy Steel 17CrNiMo7 Billets

Alloy Steel 17CrNiMo7 Bar

Alloy Steel 17CrNiMo7 Round Bars

Alloy Steel 17CrNiMo7 Flat Bars

Alloy Steel 17CrNiMo7 Square Bars

Alloy Steel 17CrNiMo7 Rectangular Bars

Alloy Steel 17CrNiMo7 Hexagonal Bars

Alloy Steel 17CrNiMo7 Forged Bars

Alloy Steel 17CrNiMo7 Rolled Bars

Alloy Steel 17CrNiMo7 Black Bars

Alloy Steel 17CrNiMo7 Bright Bars

Alloy Steel 17CrNiMo7 Proof Machined Bars

Alloy Steel 17CrNiMo7 Forgings

Alloy Steel 17CrNiMo7 Rings

Alloy Steel 17CrNiMo7 Forged Seamless Rings

Alloy Steel 17CrNiMo7 Rolled Seamless Rings

Alloy Steel 17CrNiMo7 Machined Parts

Alloy Steel 18NCD6 Plates

Alloy Steel 18NCD6 Circles

Alloy Steel 18NCD6 Plate Shapes

Alloy Steel 18NCD6 Custom Profiles

Alloy Steel 18NCD6 Patta

Alloy Steel 18NCD6 Patti

Alloy Steel 18NCD6 Rods

Alloy Steel 18NCD6 Blooms

Alloy Steel 18NCD6 Billets

Alloy Steel 18NCD6 Bar

Alloy Steel 18NCD6 Round Bars

Alloy Steel 18NCD6 Flat Bars

Alloy Steel 18NCD6 Square Bars

Alloy Steel 18NCD6 Rectangular Bars

Alloy Steel 18NCD6 Hexagonal Bars

Alloy Steel 18NCD6 Forged Bars

Alloy Steel 18NCD6 Rolled Bars

Alloy Steel 18NCD6 Black Bars

Alloy Steel 18NCD6 Bright Bars

Alloy Steel 18NCD6 Proof Machined Bars

Alloy Steel 18NCD6 Forgings

Alloy Steel 18NCD6 Rings

Alloy Steel 18NCD6 Forged Seamless Rings

Alloy Steel 18NCD6 Rolled Seamless Rings

Alloy Steel 18NCD6 Machined Parts

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of DIN 17CrNiMo6-7 Round Bars & Forged Blocks Suppliers from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc. 

Corporate Information

Supply Location

world-map

We can supply or export all over the globe even small quantities by courier/air mode for fastest delivery.

Give us a try. Will transform into life long customer.

Products

Angle, channel, beam, gasket, filter, silencers, valve, flange, fitting, pipe, tube, tubing, plate, sheet, coil, foil, shim, strip, circle, flat, fastener, stud or threaded rod, bolt, nut, washer, screw, rivet, retaining ring, cir-clip, pin, spring, insert, standoff, forgings, machined parts or components, filler wire, etc.