Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Cold-Work Tool Steel, Die Steel & Cold-Work Tool Steel Bar supplier, exporter, trader, wholesaler, stockiest, dealer, distributor, stock holder.

Cold-working Tool Steel die grades starts with “A”, “O”, “D” & they possesses high hardenability and wear resistance, and average toughness and heat softening resistance.  The use of oil quenching and air-hardening helps reduce distortion, avoiding the higher stresses caused by the quicker water quenching.

Cold-work tool steel bar & rods are divided into 3 categories as mentioned below:

O-series (Oil-Hardening Tool Steel)

A-series (Air-Hardening Tool Steel)

D-series (High carbon high chromium Tool Steel)

Cold Work Tool Steel Bars can be avail as Concast (CC), Rolled, Forged in normalized, annealed, hardened (quenched) & tempered condition with black, bright, ground, peeled, proof machined finish. Client can avail VACUUM DEGASSING (VD) route Cold work Tool Steel Bar, Round Bar, Flat Bar, Square Bar, Rectangular Bar, Hollow Bar, Rolled Bar, Forged Bar, Annealed Bar, Hardened & Tempered Bar, Round Corner Bars (RCS), Square Corner Bars (SCS), Rod, Hollow Rods.

Cold Working Tool Steel Rolled Bar Manufacturing Process Route:

IF (Induction Furnace) -> Ladle Refining Furnace (LRF) -> Vacuum Degassing (VD) -> Continuous Casting (CC) -> Rolling -> Normalized or Annealed & Hardened (Quenched) & Tempered (HT / QT)-> Ultra Sonic Testing (UT) -> Machining -> Marking -> Final Inspection -> Packaging -> Dispatch

Cold Working Tool Steel Forged Bar Manufacturing Process Route:

IF (Induction Furnace) -> Ladle Refining Furnace (LRF) -> Vacuum Degassing (VD) -> Bar Processing (BP) -> Forging -> Normalized or Annealed & Hardened (Quenched) & Tempered (HT / QT) -> Ultra Sonic Testing (UT) -> Machining -> Marking -> Final Inspection -> Packaging -> Dispatch

Size Specifications for Cold-Work Tool Steel Billet: 125 x 125, 160 x 160, 200 x 200mm

Size Specifications for Cold Work Tool Steel Round Bar & Rods: 22mm upto 350mm

Size Specifications for Cold Working Tool Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length (can be customized)

Size Specifications for Cold Working Tool Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Specifications for Cold Working Tool Steel Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of AISI-SAE grade Cold Work Tool Steel Bar online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

Other Possible products in Cold Working Tool Steel are mentioned below:

Cold Work Tool Steel Billet
Cold Work Tool Steel Concast Billet
Cold Work Tool Steel Round Billet
Cold Work Tool Steel Square Billet
Cold Work Tool Steel Bar (IBR Quality Approved Bars)
Cold Work Tool Steel Round Bar (IBR Quality Approved Bars)
Cold Work Tool Steel Flat Bar
Cold Work Tool Steel Square Bar
Cold Work Tool Steel Round Corner Square Bar
Cold Work Tool Steel RCS Bar
Cold Work Tool Steel Straight Corner Square Bar
Cold Work Tool Steel SCS Bar
Cold Work Tool Steel Hexagonal Bar
Cold Work Tool Steel Hollow Bar
Cold Work Tool Steel Hex Bar
Cold Work Tool Steel Concast Bar
Cold Work Tool Steel Forged Bar (IBR Quality Approved Bars)
Cold Work Tool Steel Rolled Bar (IBR Quality Approved Bars)
Cold Work Tool Steel Black Bar
Cold Work Tool Steel Bright Bar
Cold Work Tool Steel Peeled Bar
Cold Work Tool Steel Machined Bar (Proof Machined Bars)
Cold Work Tool Steel Annealed Bar (Spheroidized Annealed Bars)
Cold Work Tool Steel Hardened & Tempered (HT) Bar
Cold Work Tool Steel Quenched & Tempered (QT) Bar
Cold Work Tool Steel Blocks (Square, Rectangular)
Cold Work Tool Steel Slabs
Cold Work Tool Steel Shafting (Shafts)
Cold Work Tool Steel Plate
Cold Work Tool Steel Sheet (Shim Sheets)
Cold Work Tool Steel Circle
Cold Work Tool Steel Strip (Customized Strips)
Cold Work Tool Steel Ring (Seamless, Welded, Forged, Rolled)
Cold Work Tool Steel Forged Ring (Seamless, Welded)
Cold Work Tool Steel Rolled Ring (Seamless, Welded)
Cold Work Tool Steel Seamless Ring (Forged, Rolled)
Cold Work Tool Steel Welded Ring (Forged, Rolled)
Cold Work Tool Steel Tube (Seamless, Welded, IBR, ASTM, ASME)
Cold Work Tool Steel Pipe (Seamless, Welded, IBR, ASTM, ASME)
Cold Work Tool Steel Die (Mould Dies, Extrusion Dies, Mold Injection Die)
Cold Work Tool Steel Fasteners
Cold Work Tool Steel Stud
Cold Work Tool Steel Bolt
Cold Work Tool Steel Screws
Cold Work Tool Steel Nut
Cold Work Tool Steel Washer
Cold Work Tool Steel Forgings
Cold Work Tool Steel Machined Part
Cold Work Tool Steel Welded Compenents
Cold Work Tool Steel Welding Consumables
Cold Work Tool Steel Filler Metal Wire Rod
Cold Work Tool Steel Rod
AISI grade A-type tool steel bar
SAE grade A-type tool steel bar
AISI grade A-type Cold working tool steel bar
SAE grade A-type Cold working tool steel bar
AISI grade O-type tool steel bar
SAE grade O-type tool steel bar
AISI grade O-type Cold working tool steel bar
SAE grade O-type Cold working tool steel bar
AISI grade D-type tool steel bar
SAE grade D-type tool steel bar
AISI grade D-type Cold working tool steel bar
SAE grade D-type Cold working tool steel bar
Cold-working tool steel bar
VD Route Cold-working tool steel bars
VOD Route Cold-working tool steel bars
Cold-working tool steel annealed bars
Cold-working tool steel rods

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Cold Working Tool Steel Rod & Bars from associated manufacturer to Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bonaire, Bosnia and Herzegovina, Botswana, Bouvet Island, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Cayman Islands, Central African Republic, Chad, Chile, China, Christmas Island,  Cocos (Keeling) Islands, Colombia, Comoros, Congo, Cook Islands, Costa Rica, Côte d'Ivoire, Croatia, Cuba, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Malvinas), Faroe Islands, Fiji, Finland, France, French Guiana, French Polynesia, French Southern Territories, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Heard Island and McDonald Islands, Holy See (Vatican City State), Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Tehran, Iraq, Ireland, Isle of Man, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, South Korea, Kuwait, Kyrgyzstan, Lao, Latvia,  Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macao, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norfolk Island, Northern Mariana Islands, Norway, Oman, Palau, Palestinian Territory, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Pitcairn, Poland, Portugal, Puerto Rico, Qatar, Doha,  Réunion, Romania, Russian Federation, Rwanda, Saint Barthélemy, Saint Helena, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Pierre and Miquelon, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (Dutch part), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and the South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tokelau, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, UAE, United Kingdom, UK, United States, USA, Uruguay, Uzbekistan, Vanuatu, Venezuela, Viet Nam, Virgin Islands, U.S., Wallis and Futuna, Western Sahara, Yemen, Zambia, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading SKD5 Tool Steel, Skd5 Die Steel, skd5 Hot Work Tool Steel & JIS SKD5 Hot Working Tool Steel Round Bar & Flat Bars supplier, exporter, trader, wholesaler, stockiest, dealer, distributor, stock holder.

SKD5 Steels are tungsten-chromium hot-work tool steel  can be forged at 1150°C (2100°F) down to 927°C (1700°F) but not below 899°C (1650°F). SKD5 Tool Steel Bar annealing should be performed at 885°C (1625°F) followed by slow furnace cooling at a temperature less than 4°C (40°F) per hour. Applications of skd5 die steel are hot-working dies and toolings, e.g., die casting, extrusion and hot-forming of parts. JIS SKD5 Hot Working Tool Steel Bar can be avail as Concast (CC), Rolled, Forged in normalized, annealed, hardened (quenched) & tempered condition with black, bright, ground, peeled, proof machined finish. Client can avail VACUUM DEGASSING (VD) route SKD5 Hot work Tool Steel Bar, Round Bar, Flat Bar, Square Bar, Rectangular Bar, Hollow Bar, Rolled Bar, Forged Bar, Annealed Bar, Hardened & Tempered Bar, Round Corner Bars (RCS), Square Corner Bars (SCS), Rod, Hollow Rods.

Hot Working SKD5 Tool Steel Rolled Bar Manufacturing Process Route:

IF (Induction Furnace) -> Ladle Refining Furnace (LRF) -> Vacuum Degassing (VD) -> Continuous Casting (CC) -> Rolling -> Normalized or Annealed & Hardened (Quenched) & Tempered (HT / QT)-> Ultra Sonic Testing (UT) -> Machining -> Marking -> Final Inspection -> Packaging -> Dispatch

Hot Working SKD5 Tool Steel Forged Bar Manufacturing Process Route:

IF (Induction Furnace) -> Ladle Refining Furnace (LRF) -> Vacuum Degassing (VD) -> Bar Processing (BP) -> Forging -> Normalized or Annealed & Hardened (Quenched) & Tempered (HT / QT) -> Ultra Sonic Testing (UT) -> Machining -> Marking -> Final Inspection -> Packaging -> Dispatch

Size Specifications for SKD5 Hot Working Tool Steel Round Bar & Rods: 22mm upto 100mm

Size Specifications for JIS SKD5 Hot Working Tool Steel Square, Flat, Rectangular Bars: 6mm upto 100mm in thickness, 1000mm to 6000mm length (can be Customized)

 Size Specifications for SKD5 Hot Working Tool Steel Hollow Bars & Rod: 50mm upto 100mm in diameter as welded hollow bars & 2inch to 4inch diameter as seamless hollow bars

Size Specifications for Tool Steel SKD5 Hollow Rings: 50mm upto 100mm in diameter as welded hollow rings & 2inch to 4inch diameter as seamless hollow rings

Chemical Composition (Chemistry) of JIS SKD5 Hot Working Tool Steel:

Client can procure smaller quantities of JIS SKD5 Hot Working Tool Steel Round Bar & Rods online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

Other Possible products in JIS SKD5 Hot Working Tool Steel are mentioned below:

SKD5 Billet
SKD5 Concast Billet
SKD5 Round Billet
SKD5 Square Billet
SKD5 Bar (IBR Quality Approved Bars)
SKD5 Round Bar (IBR Quality Approved Bars)
SKD5 Flat Bar
SKD5 Square Bar
SKD5 Round Corner Square Bar
SKD5 RCS Bar
SKD5 Straight Corner Square Bar
SKD5 SCS Bar
SKD5 Hexagonal Bar
SKD5 Hollow Bar
SKD5 Hex Bar
SKD5 Concast Bar
SKD5 Forged Bar (IBR Quality Approved Bars)
SKD5 Rolled Bar (IBR Quality Approved Bars)
SKD5 Black Bar
SKD5 Bright Bar
SKD5 Peeled Bar
SKD5 Machined Bar (Proof Machined Bars)
SKD5 Annealed Bar (Spheroidized Annealed Bars)
SKD5 Hardened & Tempered (HT) Bar
SKD5 Quenched & Tempered (QT) Bar
SKD5 Blocks (Square, Rectangular)
SKD5 Slabs
SKD5 Shafting (Shafts)
SKD5 Plate
SKD5 Sheet (Shim Sheets)
SKD5 Circle
SKD5 Strip (Customized Strips)
SKD5 Ring (Seamless, Welded, Forged, Rolled)
SKD5 Forged Ring (Seamless, Welded)
SKD5 Rolled Ring (Seamless, Welded)
SKD5 Seamless Ring (Forged, Rolled)
SKD5 Welded Ring (Forged, Rolled)
SKD5 Tube (Seamless, Welded, IBR, ASTM, ASME)
SKD5 Pipe (Seamless, Welded, IBR, ASTM, ASME)
SKD5 Die (Mould Dies, Extrusion Dies, Mold Injection Die)
SKD5 Fasteners
SKD5 Stud
SKD5 Bolt
SKD5 Screws
SKD5 Nut
SKD5 Washer
SKD5 Forgings
SKD5 Machined Part
SKD5 Welded Compenents
SKD5 Welding Consumables
SKD5 Filler Metal Wire Rod
VD Route SKD5 bars
VOD Route SKD5 bars
SKD5 annealed bars
SKD5 rods

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of JIS SKD5 Hot Working Tool Steel Rod & Round Bars from associated manufacturer to Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bonaire, Bosnia and Herzegovina, Botswana, Bouvet Island, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Cayman Islands, Central African Republic, Chad, Chile, China, Christmas Island,  Cocos (Keeling) Islands, Colombia, Comoros, Congo, Cook Islands, Costa Rica, Côte d'Ivoire, Croatia, Cuba, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Malvinas), Faroe Islands, Fiji, Finland, France, French Guiana, French Polynesia, French Southern Territories, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Heard Island and McDonald Islands, Holy See (Vatican City State), Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Tehran, Iraq, Ireland, Isle of Man, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, South Korea, Kuwait, Kyrgyzstan, Lao, Latvia,  Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macao, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norfolk Island, Northern Mariana Islands, Norway, Oman, Palau, Palestinian Territory, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Pitcairn, Poland, Portugal, Puerto Rico, Qatar, Doha,  Réunion, Romania, Russian Federation, Rwanda, Saint Barthélemy, Saint Helena, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Pierre and Miquelon, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (Dutch part), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and the South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tokelau, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, UAE, United Kingdom, UK, United States, USA, Uruguay, Uzbekistan, Vanuatu, Venezuela, Viet Nam, Virgin Islands, U.S., Wallis and Futuna, Western Sahara, Yemen, Zambia, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.2581 Tool Steel, 2581 Die Steel, 1.2581 Hot Work Tool Steel & DIN 1.2581 Hot Working Tool Steel Round Bar & Flat Bars supplier, exporter, trader, wholesaler, stockiest, dealer, distributor, stock holder.

1.2581 Steel is tungsten-chromium based hot-work tool steel which contains primary alloying elements like tungsten, chromium, carbon, and vanadium. 2581 are resistant to distortion when they are air-hardened, and have higher hardening temperature when compared to other chromium hot-work steels.DIN 1.2581 / 2581 Hot Working Tool Steel Bar can be avail as Concast (CC), Rolled, Forged in normalized, annealed, hardened (quenched) & tempered condition with black, bright, ground, peeled, proof machined finish. Client can avail VACUUM DEGASSING (VD) route 1.2581 Hot work Tool Steel Bar, Round Bar, Flat Bar, Square Bar, Rectangular Bar, Hollow Bar, Rolled Bar, Forged Bar, Annealed Bar, Hardened & Tempered Bar, Round Corner Bars (RCS), Square Corner Bars (SCS), Rod, Hollow Rods.

Hot Working 1.2581 Tool Steel Rolled Bar Manufacturing Process Route:

IF (Induction Furnace) -> Ladle Refining Furnace (LRF) -> Vacuum Degassing (VD) -> Continuous Casting (CC) -> Rolling -> Normalized or Annealed & Hardened (Quenched) & Tempered (HT / QT)-> Ultra Sonic Testing (UT) -> Machining -> Marking -> Final Inspection -> Packaging -> Dispatch

Hot Working 1.2581 Tool Steel Forged Bar Manufacturing Process Route:

IF (Induction Furnace) -> Ladle Refining Furnace (LRF) -> Vacuum Degassing (VD) -> Bar Processing (BP) -> Forging -> Normalized or Annealed & Hardened (Quenched) & Tempered (HT / QT) -> Ultra Sonic Testing (UT) -> Machining -> Marking -> Final Inspection -> Packaging -> Dispatch

Size Specifications for 1.2581 Hot Working Tool Steel Round Bar & Rods: 22mm upto 100mm

Size Specifications for DIN 1.2581 Hot Working Tool Steel Square, Flat, Rectangular Bars: 6mm upto 100mm in thickness, 1000mm to 6000mm length (can be Customized)

 Size Specifications for 1.2581 Hot Working Tool Steel Hollow Bars & Rod: 50mm upto 100mm in diameter as welded hollow bars & 2inch to 4inch diameter as seamless hollow bars

Size Specifications for Tool Steel 1.2581 Hollow Rings: 50mm upto 100mm in diameter as welded hollow rings & 2inch to 4inch diameter as seamless hollow rings

Chemical Composition (Chemistry) of DIN 1.2581 / 2581 Hot Working Tool Steel:

Client can procure smaller quantities of DIN 1.2581 Hot Working Tool Steel Round Bar & Rods online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

Other Possible products in DIN 1.2581 Hot Working Tool Steel are mentioned below:

1.2581 Billet
1.2581 Concast Billet
1.2581 Round Billet
1.2581 Square Billet
1.2581 Bar (IBR Quality Approved Bars)
1.2581 Round Bar (IBR Quality Approved Bars)
1.2581 Flat Bar
1.2581 Square Bar
1.2581 Round Corner Square Bar
1.2581 RCS Bar
1.2581 Straight Corner Square Bar
1.2581 SCS Bar
1.2581 Hexagonal Bar
1.2581 Hollow Bar
1.2581 Hex Bar
1.2581 Concast Bar
1.2581 Forged Bar (IBR Quality Approved Bars)
1.2581 Rolled Bar (IBR Quality Approved Bars)
1.2581 Black Bar
1.2581 Bright Bar
1.2581 Peeled Bar
1.2581 Machined Bar (Proof Machined Bars)
1.2581 Annealed Bar (Spheroidized Annealed Bars)
1.2581 Hardened & Tempered (HT) Bar
1.2581 Quenched & Tempered (QT) Bar
1.2581 Blocks (Square, Rectangular)
1.2581 Slabs
1.2581 Shafting (Shafts)
1.2581 Plate
1.2581 Sheet (Shim Sheets)
1.2581 Circle
1.2581 Strip (Customized Strips)
1.2581 Ring (Seamless, Welded, Forged, Rolled)
1.2581 Forged Ring (Seamless, Welded)
1.2581 Rolled Ring (Seamless, Welded)
1.2581 Seamless Ring (Forged, Rolled)
1.2581 Welded Ring (Forged, Rolled)
1.2581 Tube (Seamless, Welded, IBR, ASTM, ASME)
1.2581 Pipe (Seamless, Welded, IBR, ASTM, ASME)
1.2581 Die (Mould Dies, Extrusion Dies, Mold Injection Die)
1.2581 Fasteners
1.2581 Stud
1.2581 Bolt
1.2581 Screws
1.2581 Nut
1.2581 Washer
1.2581 Forgings
1.2581 Machined Part
1.2581 Welded Compenents
1.2581 Welding Consumables
1.2581 Filler Metal Wire Rod
VD Route 1.2581 bars
VOD Route 1.2581 bars
1.2581 annealed bars
1.2581 rods

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of DIN 1.2581 Hot Working Tool Steel Rod & Round Bars from associated manufacturer to Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bonaire, Bosnia and Herzegovina, Botswana, Bouvet Island, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Cayman Islands, Central African Republic, Chad, Chile, China, Christmas Island,  Cocos (Keeling) Islands, Colombia, Comoros, Congo, Cook Islands, Costa Rica, Côte d'Ivoire, Croatia, Cuba, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Malvinas), Faroe Islands, Fiji, Finland, France, French Guiana, French Polynesia, French Southern Territories, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Heard Island and McDonald Islands, Holy See (Vatican City State), Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Tehran, Iraq, Ireland, Isle of Man, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, South Korea, Kuwait, Kyrgyzstan, Lao, Latvia,  Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macao, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norfolk Island, Northern Mariana Islands, Norway, Oman, Palau, Palestinian Territory, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Pitcairn, Poland, Portugal, Puerto Rico, Qatar, Doha,  Réunion, Romania, Russian Federation, Rwanda, Saint Barthélemy, Saint Helena, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Pierre and Miquelon, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (Dutch part), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and the South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tokelau, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, UAE, United Kingdom, UK, United States, USA, Uruguay, Uzbekistan, Vanuatu, Venezuela, Viet Nam, Virgin Islands, U.S., Wallis and Futuna, Western Sahara, Yemen, Zambia, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading H21 Tool Steel, H-21 Die Steel, H21 Hot Work Tool Steel & AISI-SAE H21 Hot Working Tool Steel Round Bar & Flat Bars supplier, exporter, trader, wholesaler, stockiest, dealer, distributor, stock holder.

AISI H-21 is tungsten based Hot Working Tool Steel with chromium steel. H21 find its applications in hot-working dies and tooling, e.g., die casting, extrusion and hot-forming of parts and components.

H21 equivalent die steel, alloy steel & tool steel grades of different countries are USA AISI H-21, SAE H21, European EU EN X30WCrV9-3, Germany DIN, W.Nr 1.2581, 2581, X30WCrV9-3, Japan JIS SKD5, France AFNOR Z30WCV9, England BS BH21, Italy UNI X30WCrV9-3KU, China GB 3Cr2W8V, Poland PN WWW, Czechia CSN 19721, Austria ONORM W100, Russia GOST 3KH2V8F, Inter ISO X30WCrV9-3 which can be avail as Plates, Sheets, Circles, Patta, Strips, Patti, Plate Shape, Sheet Shapes, Bars, Round Bar, Flat Bar, Square Bar, Rectangular Bar, Hexagonal Bar, Hollow Bars, Rolled Bars, Forged Bars, Annealed Bars, Hardened & Tempered Bars, Quenched & Tempered Bars, HT Bar, QT Bar, Slabs, Die Block, Blocks, Shafts, Forged Ring, Rolled Ring, Welded Rings, Seamless Rings, Forgings, Machined Parts, Rod, Hollow Rods.

H-21 / 2581 Steel has about 2.5-3.2% Chromium, 8.5-9.5% Tungsten, 0.3-0.5% Vanadium. Thermal shock resistance and toughness of DIN 1.2581 steels can be improved by reducing the carbon content. SAE H21 Hot Working Tool Steel Bar can be avail as Concast (CC), Rolled, Forged in normalized, spheroidized annealed, hardened (quenched) & tempered condition with black, bright, ground, peeled, proof machined finish. Client can avail VACUUM DEGASSING (VD) route H-21 Hot work Tool Steel Bar, Round Bar, Flat Bar, Square Bar, Rectangular Bar, Hollow Bar, Rolled Bar, Forged Bar, Annealed Bar, Hardened & Tempered Bar, Round Corner Bars (RCS), Square Corner Bars (SCS), Rod, Hollow Rods.

Hot Working H-21 Tool Steel Rolled Bar Manufacturing Process Route:

IF (Induction Furnace) -> Ladle Refining Furnace (LRF) -> Vacuum Degassing (VD) -> Continuous Casting (CC) -> Rolling -> Normalized or Annealed & Hardened (Quenched) & Tempered (HT / QT)-> Ultra Sonic Testing (UT) -> Machining -> Marking -> Final Inspection -> Packaging -> Dispatch

Hot Working H-21 Tool Steel Forged Bar Manufacturing Process Route:

IF (Induction Furnace) -> Ladle Refining Furnace (LRF) -> Vacuum Degassing (VD) -> Bar Processing (BP) -> Forging -> Normalized or Annealed & Hardened (Quenched) & Tempered (HT / QT) -> Ultra Sonic Testing (UT) -> Machining -> Marking -> Final Inspection -> Packaging -> Dispatch

Size Specifications for H21 Hot Working Tool Steel Round Bar & Rods: 22mm upto 100mm

Size Specifications for SAE H21 Hot Working Tool Steel Square, Flat, Rectangular Bars: 6mm upto 100mm in thickness, 1000mm to 6000mm length (can be Customized)

 Size Specifications for H-21 Hot Working Tool Steel Hollow Bars & Rod: 50mm upto 100mm in diameter as welded hollow bars & 2inch to 4inch diameter as seamless hollow bars

Size Specifications for Tool Steel H-21 Hollow Rings: 50mm upto 100mm in diameter as welded hollow rings & 2inch to 4inch diameter as seamless hollow rings

Chemical Composition (Chemistry) of AISI H21 Hot Working Tool Steel:

Different designations & equivalent steel number of AISI H21 Hot Working Tool Steel:

USA AISI: H-21, SAE H21,

European EU EN: X30WCrV9-3

Germany DIN, W.Nr:  1.2581, 2581, X30WCrV9-3

Japan JIS: SKD5

France AFNOR: Z30WCV9

England BS: BH21

Italy UNI: X30WCrV9-3KU

China GB: 3Cr2W8V

Poland PN: WWW

Czechia CSN: 19721

Austria ONORM: W100

Russia GOST: 3KH2V8F

Inter ISO: X30WCrV9-3

Client can procure smaller quantities of AISI H21 Hot Working Tool Steel Round Bars online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

Other Possible products in AISI H21 Hot Working Tool Steel are mentioned below:

H21 Billet
H21 Concast Billet
H21 Round Billet
H21 Square Billet
H21 Bar (IBR Quality Approved Bars)
H21 Round Bar (IBR Quality Approved Bars)
H21 Flat Bar
H21 Square Bar
H21 Round Corner Square Bar
H21 RCS Bar
H21 Straight Corner Square Bar
H21 SCS Bar
H21 Hexagonal Bar
H21 Hollow Bar
H21 Hex Bar
H21 Concast Bar
H21 Forged Bar (IBR Quality Approved Bars)
H21 Rolled Bar (IBR Quality Approved Bars)
H21 Black Bar
H21 Bright Bar
H21 Peeled Bar
H21 Machined Bar (Proof Machined Bars)
H21 Annealed Bar (Spheroidized Annealed Bars)
H21 Hardened & Tempered (HT) Bar
H21 Quenched & Tempered (QT) Bar
H21 Blocks (Square, Rectangular)
H21 Slabs
H21 Shafting (Shafts)
H21 Plate
H21 Sheet (Shim Sheets)
H21 Circle
H21 Strip (Customized Strips)
H21 Ring (Seamless, Welded, Forged, Rolled)
H21 Forged Ring (Seamless, Welded)
H21 Rolled Ring (Seamless, Welded)
H21 Seamless Ring (Forged, Rolled)
H21 Welded Ring (Forged, Rolled)
H21 Tube (Seamless, Welded, IBR, ASTM, ASME)
H21 Pipe (Seamless, Welded, IBR, ASTM, ASME)
H21 Die (Mould Dies, Extrusion Dies, Mold Injection Die)
H21 Fasteners
H21 Stud
H21 Bolt
H21 Screws
H21 Nut
H21 Washer
H21 Forgings
H21 Machined Part
H21 Welded Compenents
H21 Welding Consumables
H21 Filler Metal Wire Rod
VD Route H21 bars
VOD Route H21 bars
H21 annealed bars
H21 rods

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of AISI H21 Hot Working Tool Steel Rod & Round Bars from associated manufacturer to Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bonaire, Bosnia and Herzegovina, Botswana, Bouvet Island, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Cayman Islands, Central African Republic, Chad, Chile, China, Christmas Island,  Cocos (Keeling) Islands, Colombia, Comoros, Congo, Cook Islands, Costa Rica, Côte d'Ivoire, Croatia, Cuba, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Malvinas), Faroe Islands, Fiji, Finland, France, French Guiana, French Polynesia, French Southern Territories, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Heard Island and McDonald Islands, Holy See (Vatican City State), Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Tehran, Iraq, Ireland, Isle of Man, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, South Korea, Kuwait, Kyrgyzstan, Lao, Latvia,  Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macao, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norfolk Island, Northern Mariana Islands, Norway, Oman, Palau, Palestinian Territory, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Pitcairn, Poland, Portugal, Puerto Rico, Qatar, Doha,  Réunion, Romania, Russian Federation, Rwanda, Saint Barthélemy, Saint Helena, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Pierre and Miquelon, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (Dutch part), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and the South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tokelau, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, UAE, United Kingdom, UK, United States, USA, Uruguay, Uzbekistan, Vanuatu, Venezuela, Viet Nam, Virgin Islands, U.S., Wallis and Futuna, Western Sahara, Yemen, Zambia, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.